FIBARO FIBEFGMS-001-ZW5 Quick Start
Browse online or download pdf Quick Start for Accessories FIBARO FIBEFGMS-001-ZW5. FIBARO FIBEFGMS-001-ZW5 4 pages. Motion sensor, temperature sensor, light sensor, accelerometer
Print Page
FIBEFGMS-001-ZW5
Motion Sensor, Temperature Sensor, Light Sensor, Accelerometer
Firmware Version : 3.2
Quick Start
S
This device is a Z-Wave Sensor. Inclusion, Exclusion and Wake Up are confirmed by triple clicking the B-Button inside the case.
Please refer to the chapters below for detailed information about all aspects of the products usage.
Product description
The Fibaro Motion Sensor is a universal Z-Wave multi-sensor. Along with detecting motion the device measures the temperature and light intensity.
The sensor has a built-in accelerometer to detect any tampering of the device. The Fibaro Motion Sensor is battery powered device and designed
to be installed qickly and easily on any surface. The LED indicator signals motion, temperature level, operating mode and can be used to see if
device is within the Z-Wave network. The motion sensor can be used for lighting scenes and security monitoring systems.
Installation Guidelines
INSTALLATION POSITION
Fibaro Motion Sensor has to be installed in a corner of the room or perpendicularly to the doors. Actual range of the sensor can be influenced by
environment conditions. Should false motion alarms be reported, check for any moving objects within the sensor's detection area, such as trees
blowing in the wind, cars passing by, windmills. False motion alarms may be caused by moving masses of air and heat as well. If the device keeps
on reporting false alarms, despite eliminating all of the above-mentioned factors, install the device in another place.
SENSOR INSTALLATION