FIBARO FGBHRGBW-041-4 Operating Manual - Page 7

Browse online or download pdf Operating Manual for Controller FIBARO FGBHRGBW-041-4. FIBARO FGBHRGBW-041-4 15 pages. Rainbow controller

Print Page

4: Installation

4.1: Connecting Rainbow Controller

(FGBHRGBW-041-1)

•

InstallatIon

Connecting the device in a manner inconsistent with this

manual may cause risk to health, life or material damage.

Connect LED strip channels in accordance with the diagram 1.

Rainbow Controller and the load connected to its output must be

unit) with short circuit protection. Connecting higher voltage or

voltage not matching the load's voltage may cause damage to the

device.

The device is powered with secure voltage; nevertheless, the user

should be extra careful or should commission the installation to a

qualified person.

Do not connect devices which are not compliant with the

specification.

Every connected device should be compliant with the relevant

safety standards.

Connecting long RGBW/RGB/LED strips may cause voltage drops,

resulting in lower light brightness further from R/G/B/W outputs.

To eliminate this effect it is recommended to connect a few short-

er strips in parallel connection instead of one long strip connect-

ed serially.

The LED strip should be mounted to aluminium profile for better

heat dissipation.

If you connect a 12V DC LED strip, you also need to use the 12V DC

power adapter. For 24V DC LED strip use 24V DC power adapter.

FIBARO Rainbow Controller (FGBHRGBW-041-1) sold

without any LED strip lights has a MOLEX 105307-1205

connector included.

We recommend connecting LED strip channels in the

same order as on the diagram 1 (B - OUT1, R - OUT2, G

- OUT3, W - OUT4). If you want to connect a RGB strip, use

the same diagram, but do not connect the OUT4 channel.