FIBARO FGPB-101-2 Operating Manual - Page 9
Browse online or download pdf Operating Manual for Controller FIBARO FGPB-101-2. FIBARO FGPB-101-2 15 pages. Fibaro button
Print Page#6: Advanced parameters
The Button allows to customize its operation to user's needs. The set-
tings are available in the FIBARO interface as simple options that may
be chosen by selecting the appropriate box.
In order to configure the Button (using the hC controller):
1. Go to the device options by clicking the icon:
2. Select the „Advanced" tab.
3. Modify values of chosen parameters.
4. Save the changes.
5. Wake up the device manually to confirm changes (4 clicks).
Wake up interval
Available settings: 0 or 3600-64800 (in seconds, 1h - 18h)
Default setting: 0
The Button will wake up at each defined time interval and always try to
connect with the main controller. After successful communication at-
tempt, the device will update configuration parameters, associations
and settings and then will go into Z-Wave communication standby.
After failed communication attempt (eg. no Z-Wave range) the device
will go into Z-Wave communication standby and retry to establish
connection with the main controller after the next time interval.
Setting wake up interval to 0 disables sending Wake up notification
to the controller automatically. Wake up may be still performed man-
ually by clicking the Button 4 times.
1. Scenes sent to the controller
This parameter determines which actions result in sending scene IDs
and attributes assigned to them.
Available settings: 1 - Key Pressed 1 time
Default setting:
2 - Key Pressed 2 times
4 - Key Pressed 3 times
8 - Key Pressed 4 times
16 - Key Pressed 5 times
32 - Key held Down
64 - Key Released
127 (all)
Parameter size:
1 [byte]
ADvAnCED PARAMETERS
9
i
NOTE
Longer wake up time
interval means less
frequent communica-
tion and thus a longer
battery life.
i
NOTE
values of parameter
1 may be combined,
e.g. 1+2=3 means that
scenes will be sent
after pressing the but-
ton once or twice.