FIBARO FGPB-101-5 Operating Manual - Page 12

Browse online or download pdf Operating Manual for Controller FIBARO FGPB-101-5. FIBARO FGPB-101-5 15 pages. Fibaro button

Print Page
12
i
NOTE
values
of
parame-
ter 30 may be com-
bined,
e.g.
1+2=3
means
that
alarm
frames will be sent
after pressing the but-
ton once or twice.
ADvAnCED PARAMETERS
23. Key Pressed 2 times – value of SWITCH ON command sent to
3rd association group
This parameter defines value of SWITCh On command sent to devices
in 3rd association group after a double click.
Available settings: 1-255 - sent value
Default setting:
24. Key Pressed 3 times – command sent to 3rd association group
This parameter defines commands sent to devices associated in 3rd
association group after a triple click.
Available settings: 0 - no action
Default setting:
25. Key Pressed 3 times – value of SWITCH ON command sent to
3rd association group
This parameter defines value of SWITCh On command sent to devices
in 3rd association group after a triple click.
Available settings: 1-255 - sent value
Default setting:
29. Key Held Down – command sent to 3rd association group
This parameter defines commands sent to devices associated in 3rd
association group after holding the button down.
Available settings: 0 - no action
Default setting:
30. Alarm frame triggers
Parameter determines which actions result in sending alarm frames
to 4th association group.
Available settings: 1 - Key Pressed 1 time
Default setting:
99
Parameter size:
1 - SWITCh On
2 - SWITCh OFF
3 - SWITCh On/OFF – alternately
0
Parameter size:
255
Parameter size:
1 - START LEvEL ChAnGE uP (brightening)
2 - START LEvEL ChAnGE DOWn (dimming)
3 - START LEvEL ChAnGE uP/DOWn (brighten-
ing/dimming) – alternately
3
Parameter size:
2 - Key Pressed 2 times
4 - Key Pressed 3 times
8 - Key Pressed 4 times
16 - Key Pressed 5 times
32 - Key held Down
64 - Key Released
127 (all)
Parameter size:
2 [bytes]
1 [byte]
2 [bytes]
1 [byte]
1 [byte]