Sharp Aquos Operation Manual - Page 32
Browse online or download pdf Operation Manual for LCD TV Sharp Aquos. Sharp Aquos 35 pages. Led backlight tv / monitor
Also for Sharp Aquos: User Manual (30 pages), Operation Manual (41 pages), Operation Manual (37 pages)
Print Page
<<
Appendix
Troubleshooting
Problem
No power.
Check if you pressed
Is the AC cord disconnected?
Has the power been turned on?
Unit cannot be
External influences such as lightning, static electricity, may cause improper
operated.
operation. In this case, operate the unit after first turning off the power of the
TV or unplugging the AC cord and replugging it in after 1 or 2 minutes.
Remote
Is the equipment to be operated by the remote control unit set correctly?
control unit
Are batteries inserted with polarity (+, -) aligned?
does not
Are batteries worn out? (Replace with new batteries.)
operate.
Are you using it under strong or fluorescent lighting?
Is a fluorescent light illuminated near the remote control sensor?
Picture is cut
Are Display Mode adjustments such as picture size made correctly?
off/with sidebar
Page 5-3
screen.
Strange
Adjust the picture tone.
colour, light
Pages 5-1 to 5-3
colour, or
Is the room too bright? The picture may look dark in a room that is too
colour
bright.
misalignment.
Power is
Is the sleep timer set?
suddenly
Page 7-1
turned off.
Check the power control settings.
Page 7-1
The unit's internal temperature has increased. Remove any objects blocking
vent or clean.
Possible Solution
(POWER) on the remote control unit.
Problem
No picture.
Is the connection to the device correct?
If the PC image is not displayed, check the following:
- When connecting a laptop PC to the TV, check that display output mode of the
PC is set to external monitor.
For 4K60P signals applied to an HDMI input, the external device may not be
outputting signals correctly. Set "HDMI RGB range" to "Limit".
Page 5-3
Picture
To enjoy HD images from external equipment, you are required to set up HDMI
quality of
connection.
HD
If the programme content is not of HD quality, HD images cannot be displayed.
programmes
Check that the programme you are viewing provides HD images.
is poor.
The HD cable/satellite set-top box may need to be configured to output HD
images via cable/satellite.
The cable/satellite broadcast may not support a signal resolution of 1080p.
The TV
This is not a malfunction. This happens when the cabinet slightly expands and
sometimes
contracts according to change in temperature. This does not affect the TV's
makes a
performance. Do not open the rear cover of the cabinet to reconstruct the
cracking
circuits. There exists high voltage within the cabinet and it may cause electric
sound.
shock and injury. If maintenance is required, contact your dealer.
NOTE
If require any assistance with troubleshooting, please contact SHARP
Customer Care.
EN 8-1
Possible Solution
>>