Sharp Aquos LC 32GD9E Operation Manual - Page 12

Browse online or download pdf Operation Manual for LCD TV Sharp Aquos LC 32GD9E. Sharp Aquos LC 32GD9E 40 pages. Lcd colour television

Print Page

Using external equipment

Connecting a decoder

You can use the EXT 1 terminal when connecting a

decoder and other audiovisual equipment.

EXT 1

SCART cable*

NOTE

• In cases when the decoder needs to receive signal from

the TV, make sure to set "Decoder" to "EXT1" in the

Programme Setup "Manual Adjust" menu. (See page 16.)

• Do not connect the decoder to the EXT 2 terminal.

Connecting a PC

Use the EXT 4 terminals to connect a PC.

RGB cable*

ø 3.5 mm stereo minijack cable*

RGB/DVI conversion cable*

ø 3.5 mm stereo minijack cable*

NOTE

• The cables marked with * are commercially available

items.

• The PC input terminals are DDC1/2B-compatible.

• Refer to page 33 for a list of PC signals compatible with

the TV.

• Macintosh adaptor may be required for use for some

Macintosh computers.

• When connecting to a PC, the correct input signal type is

automatically detected.

Using AV Link function

This TV incorporates three typical AV Link functions

for smooth connections between the TV and other

audiovisual equipment.

One Touch Play

While the TV is in standby mode, it automatically turns

on and plays back the image from the audiovisual

source (e.g. VCR, DVD).

WYSIWYR (What You See Is What You Record)

Decoder

When the remote control unit of the connected VCR

has the WYSIWYR button, you can automatically start

recording by pressing the WYSIWYR button.

Preset Download

Automatically transfers the channel preset information

from the tuner on the TV to the one on the connected

audiovisual equipment (e.g. VCR) via the EXT 2

terminal.

NOTE

EXT 4

• Refer to operation manuals of each external equipment

for the details.

• Only works when the audiovisual equipment is connected

to the EXT 2 terminal on the TV with AV Link via a fully

wired SCART.

• The use of the AV Link function is only possible if the TV-

set has enforced a complete auto-installation with the

connected audiovisual equipment (page 8, Initial auto

installation).

EXT 4

The availability of the AV Link function depends on the

audiovisual equipment used. Depending on the

manufacturer and type of equipment used, it is possible

that the described functions may be completely or partially

unusable.