Sharp Aquos LC-13B4H Operation Manual - Page 18
Browse online or download pdf Operation Manual for LCD TV Sharp Aquos LC-13B4H. Sharp Aquos LC-13B4H 38 pages.
Presetting the Channels (MANUAL)
Upper control panel
VOL
CH
MENU TV/VIDEO
2
PRESET
4
3
POWER
DISPLAY
MENU
SLEEP
BRIGHT
MENU
TV
LANGUAGE DIS.MODE
VIDEO
VOL(+)/(–)
VOL
CH
CH (
CHANNEL
SELECT
-/--
MPX
Upper control panel
VOL
CH
MENU
2
PRESET
4
1,2,3,5
I Setting a channel to a desired TV
station:
1
Press MENU (PRESET-1) on the
upper part of the LCD TV set for
1
more than 2 seconds. The AUTO
mode screen appears.
2
Press MENU (PRESET-1) to
1,2,6
display the MANUAL mode screen.
Press MENU (PRESET-1) again
to change the MANUAL mode as
shown below.
AUTO → MANUAL → LANGUAGE →
3
Select the channel position using
CHANNEL SELECT or CH (
(
).
4
Press VOL (+)/(–) to locate the
channel you want to preset to the
)/(
)
position. Search is initiated and
when a TV signal is received
during the search, the search
stops.
5
Repeat steps 3 and 4 above, to
preset the channel positions for
other broadcasts, etc.
6
Press MENU (PRESET-1) to
return to the normal screen.
Note:
• SYSTEM may not have been set correctly,
if noise can be heard or if there is no
sound.
In such case, reset to SOUND SYSTEM
using MENU.
I
In a weak reception area, or under
bad reception conditions.
TV/VIDEO
1
Press MENU (PRESET-1) on the
upper part of the LCD TV set for
1
more than 2 seconds. The AUTO
mode screen appears.
2
Press MENU (PRESET-1) to
display the MANUAL mode screen.
3
While the MANUAL mode screen
is displayed, press MENU (PRE-
SET-1) for more than 2 seconds.
The channel position number
remains in green.
Note:
• While the MANUAL mode screen is
displayed, press MENU (PRESET-1).
(The LANGUAGE mode screen will
appear.)
4
Adjust for good reception using
VOL (+)/(–).
5
After finishing the adjustment,
press MENU (PRESET-1) to
continue channel presetting.
PRESET (Continued)
NORMAL
SCREEN
)/
Manual mode screen
ENGLISH
SELECT:
Sound System
I
Auto mode screen
I
I
Channel position
number
I
I
EXIT:
MENU
17