Sharp Aquos LC-13B6U Operation Manual - Page 19
Browse online or download pdf Operation Manual for LCD TV Sharp Aquos LC-13B6U. Sharp Aquos LC-13B6U 49 pages. Sharp lc-13b6u, lc-15b6u liquid crystal television operation manual
Print Page
Basic Operation (Continued)
Sound Volume
■ To adjust the volume
● Press VOL (+) to increase the sound volume.
The bar indicator shifts right.
VOLUME
50
● Press VOL (–) to decrease the sound volume.
The bar indicator shifts left.
VOLUME
10
■ To mute the sound
● Press MUTE to temporarily turn off the sound.
The MUTE mark
is displayed for 4 seconds.
● Press MUTE or VOL (+)/(–) to turn the sound back to the
previous level.
The mute function is automatically turned off when any of
the following buttons are pressed: POWER, MUTE,
VOL (+)/(–) or MTS.
VOLUME
10
A
• When VOL (+)/(–) is pressed in the Mute mode, the sound turns
on and the volume indicator is displayed.
• The Mute function is cancelled when POWER is pressed.
■ To select MTS (Multichannel TV Sound)
1
Press MTS to display the MTS screen.
2
Press MTS to select the MTS settings.
STEREO: stereo audio
SAP:
secondary audio program
MONO:
monophonic audio
<
STEREO
ON A I R
<
SAP
ON A I R
MONO
A
• "ON AIR" appears when a STEREO or SAP broadcast is being
aired.
18
Changing Channels
You can select channels using Channel Select or
CH (
)/(
).
• This LCD TV set allows you to select up to 125 channels
(1 to 125). To select a channel, enter a 2- or 3-digit number.
■
Using Channel Select
When selecting the channel using Channel Select, complete
input of the channel number by holding down the button for
the last digit for a moment.
To select a 1- or 2-digit channel number (e.g., Channel 5):
Complete the following procedure within 4 seconds.
1
Press the
button.
0 –
A
• When selecting a 1-digit channel number, do not fail to press the
button first.
To select a 3-digit channel number (e.g., Channel 115):
Complete the following procedure within 4 seconds.
1
Press the
button.
1 – –
3
Press the
button.
1 1 5
A
• The 3-digit channel number can be selected only when the
receiving mode is set to CABLE in CH-SETTING. (For details on
setting the receiving mode, see page 26.)
Changing channels with CH (
Air:
Press CH ( ) and the channels change in the order shown below:
2
3
. . .
68
Press CH ( ) and the channels change in the order shown below:
3
2
69
68
Cable: Press CH ( ) and the channels change in the order shown below:
1
2
3
. . .
125
Press CH ( ) and the channels change in the order shown below:
3
2
1
125
■ Using FLASHBACK
● Press FLASHBACK to switch the currently tuned channel
to the previously tuned channel.
● Press FLASHBACK again to switch back to the currently
tuned channel.
2
Press the
button.
5
2
Press the
button.
1 1 –
)/(
) on the remote control
69
2
3
. . .
. . .
3
2
. . .
1
2
3
. . .
. . .
3
2
1
. . .