Sharp Aquos LC-13S1E Operation Manual - Page 40

Browse online or download pdf Operation Manual for LCD TV Sharp Aquos LC-13S1E. Sharp Aquos LC-13S1E 47 pages. Lcd colour television
Also for Sharp Aquos LC-13S1E: Service Manual (43 pages), Operation Manual (48 pages)

Print Page

Troubleshooting

Before calling for repair services, make the following checks for possible remedies to the symptoms encountered.

LCD TV set

Problem

Picture

Sound

There is no

picture or sound.

There is no

Picture

picture.

There is no

picture from

AV-IN 2.

There is no

sound.

There is no

picture or sound,

just noise.

Picture is not

clear.

Picture is too

light or

improperly

tinted.

The picture is

too dark.

Remote control does not work.

I Cautions regarding use in high and low temperature environments

• When the unit is used in a low temperature space (e.g. room, office), the picture may leave trails or appear slightly delayed.

This is not a malfunction, and the unit will recover when the temperature returns to normal.

• Do not leave the unit in a hot or cold location. Also, do not leave the unit in a location exposed to direct sunlight or near a

heater, as this may cause the cabinet to deform and the LCD panel to malfunction.

(Storage temperature: –20°C to +60°C (–4°F to +140°F))

LC-13/15S1E(E)-37-43

• Make sure the AC adapter is properly inserted in the power

outlet.

• Reception other than that of broadcasting stations could be the

problem.

• Make sure the input mode is set to TV.

• Make sure the main power switch of the main unit is on.

• Make sure Picture adjustment is properly adjusted.

• The fluorescent lamp may have reached the end of its service

life.

• Make sure the S-VIDEO terminal has nothing connected.

• Make sure the volume is not set to minimum.

• Make sure the sound is not set to mute.

• Make sure the antenna cable is properly connected.

• Bad reception could be the problem.

• Make sure the antenna cable is properly connected.

• Bad reception could be the problem.

• Check the colour adjustment.

• Check if "Brightness" is set to "dark".

• Check "Contrast" and "Black level".

• The fluorescent lamp may have reached the end of its service

life.

• Check if batteries in the remote control have sufficient power.

• Make sure the remote sensor window is not under strong

lighting.

Check item

03.7.17, 0:22 PM

Reference

page

–

21,22

–