Sharp Aquos LC-32AW5X Operation Manual - Page 34

Browse online or download pdf Operation Manual for LCD TV Sharp Aquos LC-32AW5X. Sharp Aquos LC-32AW5X 47 pages. Lcd colour television

Print Page
Useful adjustment settings

Blue Screen

Automatically turns the screen blue if no broadcast
signal is received.
1
Press MENU and the MENU screen displays.
2
Press c/d to select "Option".
3
Press a/b to select "Blue Screen", and then
press ENTER.
4
Press a/b to select "On", and then press
ENTER.

Colour system setting

u can change the colour system to one that is
Yo
compatible with the image on the screen.
1
Press MENU and the MENU screen displays.
2
Press c/d to select "Option".
3
Press a/b to select "Colour System", and
then press ENTER.
4
Press a/b to select a compatible video
signal system of your equipment, and then
press ENTER.
AUTO
PAL
SECAM
NTSC 3.58
NTSC 4.43
PAL-60
NOTE
• Factory preset value is "AUTO".
• If "AUTO" is selected, colour system for each channel is
automatically set. If an image does not display clearly,
select another colour system (e.g. PAL, NTSC 4.43).
LC-AW5X_33-34
33

Power Control

Power Control setting allows you to save energy.

No Signal Off

When set to "Enable", the power will automatically shut
down if no signal inputs for 15 minutes.
1
Press MENU and the MENU screen displays.
2
Press c/d to select "Option".
• Power control menu displays.
3
Press a/b to select "Power Control", and
then press ENTER.
4
Press a/b to select "No Signal Off", and
then press ENTER.
5
Press a/b to select "Enable", and then
press ENTER
• Five minutes before the power shuts down,
remaining time displays every minute.
NOTE
• "Disable" is factory preset value.
• When a TV programme finishes, and the TV receives signal
input, this function may not operate.

No Operation Off

When set to "Enable", the power will automatically shut
down if there is no operation for 3 hours.
1
Press MENU and the MENU screen displays.
2
Press c/d to select "Option".
• Power control menu displays.
3
Press a/b to select "Power Control", and
then press ENTER.
4
Press a/b to select "No Operation Off", and
then press ENTER.
5
Press a/b to select "Enable", and then
press ENTER.
•
Five minutes before the power shuts down,
remaining time displays every minute.
NOTE
• "Disable" is factory preset value.
9/12/06, 10:35 AM
33