Sharp Aquos LC-40LE530M Operation Manual - Page 14
Browse online or download pdf Operation Manual for LCD TV Sharp Aquos LC-40LE530M. Sharp Aquos LC-40LE530M 30 pages. Lcd colour television
Print Page
Audio menu
Audio
STANDARD
[
0 ]
Treble
[
0 ]
Bass
[
0 ]
Balance
SRS TS HD
Bass enhancer
Reset
H Audio adjustments
c button
Selected item
Treble
For weaker treble
Bass
For weaker bass
Balance
Decrease audio
from the right
speaker
H SRS TruSurround (TS) HD™
You can enjoy SRS TruSurround HD™ sound, the
same as you were in movie theatre.
Using SRS TS HD on the menu screen
You can produce SRS TruSurround HD™ effects from
the "Audio" setting.
Selected item
On
SRS TruSurround HD
quality surround sound experience, when
watching DVD movies and TV programmes
broadcast in surround sound.
Off
Outputs the normal sound.
H Bass enhancer
powered by SRS Labs, Inc.
This function allows you to enjoy bass-enhanced
sound.
Selected item
On
Bass enhancer function is on.
Off
Outputs the normal sound.
NOTE
• For resetting all Audio adjustment items to the factory
preset values, press a / b to select "Reset", press
ENTER, press c / d to select "Yes", and then press
ENTER.
12
ECO
Setup
–15
+15
–15
+15
L
R
[ Off ]
[ On ]
d button
For stronger treble
For stronger bass
Decrease audio
from the left
speaker
Description
TM
creates a high
Description
ECO menu
ECO
No signal off
4
Power management
No operation off
Ecology
H No signal off
You can set the TV to automatically power off in
about 15 minutes after the TV goes into a state of
receiving no programme signals, such as the end of
a broadcast day. (Enable, Disable)
• Five minutes before the power shuts down, the remaining
time displays every minute.
NOTE
• "Disable" is the factory preset value.
• When a TV programme fi nishes, and the TV receives signal
input, this function may not operate.
H Power management (PC input mode only)
You can set the TV to automatically power off when
no image is displayed on PC.
Selected item
Off
• No power management
• Factory preset value.
Mode1
• If no signal inputs for approximately
8 minutes, the power shuts down.
• Even if you start using the PC and the
signal inputs again, the TV stays off.
• The TV turns on again by pressing
POWER. (See page 8.)
Mode2
• If no signal inputs for approximately
8 seconds, the power shuts down.
• When you start using the PC and the
signal inputs again, the TV turns on.
• The TV turns on again by pressing
POWER. (See page 8.)
H No operation off
You can set the TV to automatically power off when
no TV operation is performed for more than 3 hours.
(30min., 3hr., Disable)
• Five minutes before the power shuts down, the remaining
time displays every minute.
NOTE
• "Disable" is the factory preset value.
H Ecology
When set to "Yes", the TV activates the following
power saving mode.
• "OPC" set to "On" (Page 11)
• "No signal off" set to "Enable" (Page 12)
• "Power management" set to "Mode1" (Page 12)
• "No operation off" set to "3hr." (Page 12)
• "Quick start" set to "Off" (Page 14).
NOTE
• Ecology mode cannot be deactivated by selecting "No".
Each setting must be changed individually to deactivate
Ecology mode.
Setup
Option
[ Disable ]
[ Disable ]
Description