DIGISYNTHETIC DS216 Instruction Manual - Page 5

Browse online or download pdf Instruction Manual for Computer Hardware DIGISYNTHETIC DS216. DIGISYNTHETIC DS216 10 pages. 24-bit digital three crossover processor

Print Page

If press the key second time, enter into LOW-PASS Filter type setting, users are able to select 3 kinds

of Filter curve types ("-12dB", "-18dB", "-24dB") by rotating Encoder clockwise or anti-clockwise(show

as Fig.4c), At this time, if press Encoder, able to select the cut frequency(Rang:20Hz~20kHz) (show

as Fig.4d).

If press the key third time, enter into output PHASE setting, Users are able to select 0 or 180

by rotating Encoder clockwise or anti-clockwise(show as Fig.4e).

Press the key fourthly, entering into NOISE GATE setting, Users are able to select -30dB~-10dB by

rotating Encoder clockwise or anti-clockwise( show as Fig.4f).

10. OUT GAIN-- output gain setting. Firstly pressing the key, to enter into output gain setting(show as

Fig.5a). Users are able to select any one value from "-40dB~+6dB", the step is 1dB. If press the

key again, then output is quickly shut off to MUTE (show as Fig.5b), if press the key again, then return

to output normally adjustable status (show as Fig.5a).

CH:1 LOW-PASS

RESP/Q : -24dB

Fig.4c

CH:1 LOW-PASS

FREQ: 20.0kHz

Fig.4d

CH:1

PHASE

:0'

Fig.4e

CH:1

NOISE GATE

THRESHOLD

-30dB

Fig.4f

PR:1 M1:2X2Way+2Aux

PR:1

M1:2X2W+2S

CH:1 OUT PHASE

CH:1

GN : 0.0dB

Fig.5a