Sharp CD G14000 Operation Manual - Page 43

Browse online or download pdf Operation Manual for Stereo System Sharp CD G14000. Sharp CD G14000 48 pages. Mini component system

Print Page

If trouble occurs

When this product is subjected to strong external interference

(mechanical shock, excessive static electricity, abnormal supply

voltage due to lightning, etc.) or if it is operated incorrectly, it may

malfunction.

If such a problem occurs, do the following:

1 Set the unit to the stand-by mode and turn the power on again.

2 If the unit is not restored in the previous operation, unplug and

plug in the unit, and then turn the power on.

Note:

If neither operation above restores the unit, clear all the memory by

resetting it.

Clearing all the memory (reset)

1 Press the ON/STAND-BY button to enter the power stand-by

mode.

2 While pressing down the

button until "CLEAR ALL" appears.

Caution:

This operation will erase all data stored in memory including clock,

timer settings, tuner preset, and CD program.

button and the

button, press the CD

Before transporting the unit

Remove all CDs from the unit. Make sure there is no CD in the disc

tray. Then, set the unit to the power stand-by mode. Carrying the unit

with discs left inside can damage the unit.

Care of compact discs

Compact discs are fairly resistant to damage, however mistracking

can occur due to an accumulation of dirt on the disc surface. Follow

the guidelines below for maximum enjoyment from your CD

collection and player.

Do not write on either side of the disc, particularly the non-label

side from which signals are read. Do not mark this surface.

Keep your discs away from direct sunlight, heat, and excessive

moisture.

Always hold the CDs by the edges. Fingerprints, dirt, or water on

the CDs can cause noise or mistracking. If a CD is dirty or does

not play properly, clean it with a soft, dry cloth, wiping straight out

from the center, along the radius.

CD-G14000

YES

Correct