Sharp CD-80W Operation Manual - Page 14

Browse online or download pdf Operation Manual for Stereo System Sharp CD-80W. Sharp CD-80W 28 pages.

Print Page

COMPACT DISC OPERATION

4
5
1
2
2
1
Caution:
Do not carry the unit with discs left in the disc
trays. The discs may come loose inside the
unit and they may be damaged or cause dam-
age to the unit. This may also cause malfunc-
tions.
Do not place two CDs in one disc position.
Do not push the disc tray whilst it is moving.
Do not attempt to turn the disc tray by hand. This
may cause malfunctions.
If the power fails whilst the tray is open, wait until
the power is restored.
If the disc tray is stopped forcibly, "ERR" will ap-
pear in the display and the unit will not function.
If this occurs, press the ON/STAND-BY button to
enter the stand-by mode and then turn the power
on again.
If TV or radio interference occurs during CD oper-
ation, move the unit away from the TV or radio.
If a disc is damaged, dirty, or loaded upside down,
the disc will be skipped and the next disc will auto-
matically play.
CD playback
12 cm (5")
1
Press the ON/STAND-BY button to turn the power on.
2
Press the CD button.
8 cm (3")
3
Press the OPEN/CLOSE button to open the disc tray.
4
Place the CD(s) on the disc tray, label side up.
CDs can be placed on any open position on the disc tray.
Be sure to place 8 cm (3") CD(s) in the middle of the disc
trays.
Caution:
Do not stack CDs in the tray.
This can damage the player and the CDs.
5
When loading a third disc, press the DISC SKIP button to turn
3,6
the disc tray, then place the CD in the open position.
6
Press the OPEN/CLOSE button to close the disc tray.
5,7
The total number of tracks and the total playing time for one
disc will be displayed. At this time, the disc number indicator
8
is flashing.
7
Press the DISC SKIP button to select the desired disc number.
8
Press the
5,7
Playback will begin from track 1 on the disc you have selected
to play.
After the disc finishes playing, the next disc will automatically
play.
When there is no CD in one of the disc 1 - 3 positions, that
8
position will be skipped and the next CD will be played.
When the last track on the third disc has finished playing, the
unit will stop automatically.
To interrupt playback:
Press the
6
"
Press the
point.
To stop playback:
Press the
To remove the CDs:
Whilst in the stop mode, press the OPEN/CLOSE button.
The disc tray will open. Remove the two discs. Then, press
the DISC SKIP button to rotate the disc tray and remove the
remaining disc.
After use:
Press the ON/STAND-BY button to enter the stand-by mode.
E-13
0
0R
(
) button.
6
button on the remote control.
" will appear.
0R
button to resume playback from the same
button.