Sharp CD-BA300 Operation Manual - Page 22
Browse online or download pdf Operation Manual for Stereo System Sharp CD-BA300. Sharp CD-BA300 32 pages. Cdba300 operation manual
Also for Sharp CD-BA300: Quick Manual (4 pages)
Print Page
Listening to a Cassette Tape (TAPE 1 or TAPE 2)
Before playback:
For playback, use normal or low-noise tape for the best sound.
(Metal or CrO
tape is not recommended.)
2
Do not use C-120 tapes or poor-quality tapes, as they may cause
malfunctions.
Before loading a tape into the cassette compartment, tighten the slack
with a pen or pencil.
22
Sound Control (See page 14)
*BA300_P22
22
Playback is possible in TAPE 1 compartment as well as in TAPE 2.
1
Press the ON/STAND-BY button to turn the power on.
2
Open the cassette door by pushing the area marked "7 7 7 7 7 PUSH
EJECT".
3
Load the cassette into the TAPE 1 or TAPE 2
cassette compartment with the side to be
played facing toward you.
4
Press the TAPE (1 V
V V 2) button to select the cassette you want to
V V
listen to.
5
Press the 0/R
0/R button to start playback.
0/R
0/R
0/R
When playback is performed using the remote control, press the TAPE 1 or
TAPE 2 0 button.
To stop playback:
Press the
(TAPE
) button.
Fast forward/rewind: (TAPE 2 only)
1. Press the
(TAPE ) button, then press the TAPE (1 V 2) button to select TAPE 2.
2. To advance the tape, press the W PRESET 2 4 (TAPE 2 2) button.
To rewind it, press the 5 3 PRESET X (TAPE 2 3) button.
Caution:
To remove the cassette, press the
(TAPE ) button, and then open the compart-
ment.
Before changing from one tape operation to another, press the
If a power failure occurs during tape operation, the tape head will remain engaged
with the tape and the cassette door will not open. Wait until the power is restored.
00.11.16, 2:52 PM
TAPE 1
TAPE 2
(TAPE ) button.