Sharp CD-BA300 Operation Manual - Page 28
Browse online or download pdf Operation Manual for Stereo System Sharp CD-BA300. Sharp CD-BA300 32 pages. Cdba300 operation manual
Also for Sharp CD-BA300: Quick Manual (4 pages)
Print Page
Enhancing Your System
The connection cable is not included.
Purchase a commercially available cable as shown below.
Red
White
28
BA300_P26_28
28
Listening to the playback sounds from VCR,
DVD, etc.
VCR, DVD, etc.
1
Use a connection cable to connect the VCR, DVD, etc. to the VIDEO/
AUX jacks.
When using video equipment, connect the audio output to this unit and the
video output to a television.
To the line
output jack
2
Press the ON/STAND-BY button to turn the power on.
3
Red
White
Press the VIDEO/AUX button.
4
Play the connected equipment.
Note:
To prevent hum interference, place this unit away from a television.
RCA cord
(not supplied)
To record on a tape
1
Insert a cassette in the TAPE 2 cassette compartment.
2
Press the VIDEO/AUX button.
3
Press the REC PAUSE I6
4
Press the 0/R
5
Play the VCR, DVD, etc.
Headphones
Before plugging in or unplugging the headphones, reduce the volume.
Be sure your headphones have a 1/8" (3.5 mm) diameter plug and are between 16
ohms and 50 ohms impedance. The recommended impedance is 32 ohms.
Plugging in the headphones disconnects the speakers automatically. Adjust the
volume using the VOLUME control.
I6 (I6
I6) button.
I6
I6
I6
I6
I6
I6
0/R (TAPE 2 0 0 0 0 0 ) button.
0/R
0/R
0/R
01.2.13, 2:14 PM