Sharp CD-C491H Operation Manual - Page 28
Browse online or download pdf Operation Manual for Stereo System Sharp CD-C491H. Sharp CD-C491H 48 pages. Mini component system
Print Page(Continued)
TAPE
(1
2)
REVERSE
MODE
TAPE
(1
2)
REVERSE
MODE
ON/
STAND-BY
3
1
2
3
BEAT
CANCEL
4
2
5
6
Beat cancel button:
If a whistling noise is heard when recording an MW or LW station,
you can choose the level which gives the best reception by pressing
the BEAT CANCEL button on the main unit.
To stop recording:
Press the
1
2
3
NORMAL
HIGH
4
To stop dubbing:
Press the
1
2
3
4
5
27
CD-C491H(SUK) TINSE0229AWZZ
Recording from the built-in radio
V
Press the TAPE (1
2) button to select TAPE 2.
Load a cassette into the TAPE 2 cassette compartment.
Load the tape with the side to be recorded facing you.
Wind past the tape leader, on which a recording can not
be performed.
Press the REVERSE MODE button.
... To record on only one side.
... To record on both sides.
Tune in to the desired station. (See pages 17-18.)
6
Press the REC PAUSE
(
"REC" will flash.
0
R
Press the
/
button to record side A (1), or the
button to record side B (2).
button.
Dubbing from tape to tape
Press the ON/STAND-BY button to turn the power on.
V
Press the TAPE (1
2) button to select TAPE 1.
Load a prerecorded cassette into the TAPE 1 cassette
compartment. Insert a blank tape into the TAPE 2 cas-
sette compartment.
It is recommended that the recording tape be the same
length as the master tape.
Press the NORMAL EDIT button to enter the normal
speed dubbing mode. Press the HIGH EDIT button to
enter the high speed dubbing mode.
The reverse mode will be set to
button.
TAPE 1 and TAPE 2 will simultaneously stop.
Erasing recorded tapes
Make sure that TAPE 1 is not in use.
Load the tape to be erased into the TAPE 2 cassette
compartment.
V
Press the TAPE (1
2) button to select TAPE 2.
Set the REVERSE MODE button to
side and to
to erase both sides.
6
Press the REC PAUSE
(
"REC" will flash.
0
R
Press the
/
button to erase side A (1), or the
button to erase side B (2).
To erase on both sides, begin on side A (1). [If erasing
is started from side B (2), the tape will not switch over to
side A (1).]
6
) button.
1
.
to erase only one
6
) button.
1