Sharp CD-C491H Operation Manual - Page 39
Browse online or download pdf Operation Manual for Stereo System Sharp CD-C491H. Sharp CD-C491H 48 pages. Mini component system
Print Page(Continued)
Jog dial
SLEEP
MEMORY
Sleep timer setting
1
Timer playback setting
2
1 minute - 2 hours
3
Sleep operation will
automatically stop.
The radio, compact disc and cassette deck can all be turned
off automatically.
1
2
The sleep timer is initially set to 2 hours.
To change the sleep time:
Whilst the sleep time is displayed, every time the jog dial is
turned, the time will decrease by the following intervals.
(Maximum: 2 hours - Minimum: 1 minute)
3
4
Note:
Once the sleep time is set, it will remain the same duration
until the setting is changed.
To confirm the sleep timer setting:
Press the SLEEP button.
To cancel the sleep operation:
Press the SLEEP button until "SLEEP" disappears.
The sound source selected for the sleep operation will be
used for the timer operation.
(Different sound sources cannot be selected for the sleep
Start time
operation and the timer operation.)
(Wake-up start)
1
4
2
Desired time
3
End time
(Wake-up end)
4
Caution:
When using the cassette deck, be sure the tape length is
long enough to perform both functions.
If you want to sleep and wake up listening to a tape, and
the length of the tape is shorter than the sleep timer set-
ting, timer playback will not be possible.
38
CD-C491H(SUK) TINSE0229AWZZ
Sleep operation
Play back the desired sound source.
Press the SLEEP button.
Within 5 seconds, press the MEMORY button.
The unit will enter the stand-by mode automatically after
the preset sleep time has elapsed.
Simultaneous sleep and timer operation
Start the sleep operation.
Prepare for timer playback.
(Perform steps 2 - 6 on page 36.)
When the preset sleep time has elapsed, the unit will
automatically enter the stand-by mode.
When the timer preset time is reached, timer playback
will start.