Sharp CD-DP900H Operation Manual - Page 17

Browse online or download pdf Operation Manual for Stereo System Sharp CD-DP900H. Sharp CD-DP900H 40 pages. Mini component system
Also for Sharp CD-DP900H: Operation Manual (40 pages)

Print Page

Demonstration mode

The first time the unit is plugged in, the unit will

enter the demonstration mode. You will see

words scroll.

To cancel the demonstration mode:

When the unit is in the power stand-by mode (demonstration mode), press the

EQUALIZER/X-BASS/DEMO button. The unit will enter the low power consumption

mode.

To return to the demonstration mode:

When the unit is in the power stand-by mode, press the EQUALIZER/X-BASS/DEMO

button again.

Note:

When the power is on, the EQUALIZER/X-BASS/DEMO button can be used to select

the extra bass mode.

To turn the power on

Press the ON/STAND-BY button to turn the power on.

To set the unit to stand-by mode:

Press the ON/STAND-BY button again.

Remote control

Battery installation

1 Remove the battery cover.

2 Insert the batteries according to the direction indicated in the bat-

tery compartment.

When inserting or removing the batteries, push them towards the

3 Replace the cover.

Precautions for battery use:

Replace all old batteries with new ones at the same time.

Do not mix old and new batteries.

Remove the batteries if the unit is not to be used for long periods of time. This will

prevent potential damage due to battery leakage.

Caution:

Do not use rechargeable batteries (nickel-cadmium battery, etc.).

Installing the batteries incorrectly may cause the unit to malfunction.

Notes concerning use:

Replace the batteries if the operating distance is reduced or if the operation

becomes erratic. Purchase 2 "AA" size batteries (UM/SUM-3, R6, HP-7 or similar).

Periodically clean the transmitter on the remote control and the sensor on the unit

with a soft cloth.

Exposing the sensor on the unit to strong light may interfere with operation.

Change the lighting or the direction of the unit.

Keep the remote control away from moisture, heat, shock, and vibrations.

Test of the remote control

Point the remote control directly at the remote

sensor on the unit.

The remote control can be used with-

in the range shown below:

Press the ON/STAND-BY button. Does the pow-

er turn on? Now, you can enjoy the music.

02/1/11

CD-DP900H(H)_1.fm

CD-DP900H

ENGLISH

battery terminals.

Remote sensor

0.2 m - 6 m

(8" - 20')

E-10