Sharp CD-E250E Operation Manual - Page 12
Browse online or download pdf Operation Manual for Stereo System Sharp CD-E250E. Sharp CD-E250E 32 pages. Mini component system
Also for Sharp CD-E250E: Operation Manual (32 pages)
Print Page
System connections (continued)
CD-E250E
! To mount the surround speakers on the wall
The design of the sur-
round speakers allows
5 mm (3/16")
them to be hung on the
wall. Be sure to use the
type and size of screw
that is shown to the right.
1
Make a hole in the wall using
a drill.
2
Drive a wall mount plug into
the hole using a hammer.
Drive the wall mount plug in
until it is flush with the wall
surface.
3
Drive one screw into the wall
mount plug for each speaker.
Drive the screws, so there is
about a 5 mm (3/16") space
between the wall and the head
of the screw.
4
Mount the surround speaker
on the wall so that the screw
head is inserted into the slot
on the surround speaker.
Caution:
The speaker may fall if mounted improperly. Check the stability of
the wall thoroughly. Sharp is not liable for accidents caused by poor
wall stability or improper mounting.
12
! Connecting the AC power lead
After checking all the connections have been made correctly, con-
nect the AC power lead to the AC power input socket, then plug the
3.2 mm (1/8")
AC power lead of this unit into the wall socket. If you plug in the unit
first, the unit will enter the demonstration mode.
Notes:
" Unplug the AC power lead from the wall socket if the unit will not
Min. 22 mm (7/8") 9 mm (3/8")
" Never use a power lead other than the one supplied. Otherwise,
! Demonstration mode
32 mm (1-1/4")
The first time the unit is plugged in, the
unit will enter the demonstration mode.
You will see words scroll.
8-9 mm (3/8")
To cancel the demonstration mode:
When the unit is in the power stand-by mode (demonstration mode),
press the X-BASS/DEMO button. The demonstration mode will be
cancelled and the display will disappear.
To return to the demonstration mode:
When the unit is in the power stand-by mode, press the X-BASS/
DEMO button again.
Note:
When the power is on, the X-BASS/DEMO button can be used to
select the extra bass mode.
Wall
Wall mounting
surface
screw
Wall
surface
! To turn the power on
Press the ON/STAND-BY button to turn the power on.
After use:
Press the ON/STAND-BY button to enter the power stand-by
mode.
be in use for a prolonged period of time.
a malfunction or an accident may occur.
03/2/17
CD-E250E(E)2.fm