Sharp CD-ES77 Operation Manual - Page 30
Browse online or download pdf Operation Manual for Stereo System Sharp CD-ES77. Sharp CD-ES77 36 pages. Sharp mini component system cd-es700 cd-es77
Print Page
CD-ES700
Timer and sleep operation (continued)
CD-ES77
! Sleep operation
The radio, compact disc and cassette tape can all be turned off
automatically.
1
Play back the desired sound source.
2
Press the CLOCK/TIMER button.
3
Within 10 seconds, press the
or
"SLEEP", and press the MEMO-
RY/SET button.
4
Press the
(Maximum: 3 hours - Minimum: 1 minute)
" 3 hours - 5 minutes
" 5 minutes - 1 minute
5
Press the MEMORY/SET but-
ton.
"SLEEP" will appear.
6
The unit will enter the power stand-by mode automatically
after the preset time has elapsed.
The volume will be turned down 1 minute before the sleep op-
eration finishes.
To confirm the remaining sleep time:
1
While "SLEEP" is indicated, press the CLOCK/TIMER button.
2
Within 10 seconds, press the
"SLEEP X : XX".
"X : XX" is sleep remaining time.
" The remaining sleep time is displayed for about 10 seconds.
" You can change the remaining sleep time while it is displayed by
pressing the MEMORY/SET button (steps 4 - 5).
30
button to select
or
button to select the time.
5-minute intervals
1-minute intervals
or
button to select
To cancel the sleep operation:
Press the ON/STAND-BY button while "SLEEP" is indicated.
To cancel the sleep operation without setting the unit to the stand-by
mode, proceed as follows.
1
While "SLEEP" is indicated, press the CLOCK/TIMER button.
2
Within 10 seconds, press the
"SLEEP OFF", and press the MEMORY/SET button.
! To use timer and sleep operation together
Sleep and timer playback:
For example, you can fall asleep listening to the radio and wake up
to CD in the next morning.
Sleep and timer recording:
For example, you can fall asleep listening to the CD and record radio
programs while sleeping.
1
Set the sleep time (see left, steps 1 - 5).
2
While the sleep timer is set, set the timer playback or recording
(steps 2 - 10, pages 27 - 28).
Timer playback or
recording setting
Sleep timer setting
1 minute - 3 hours
Sleep operation will
automatically stop.
Caution:
When using the cassette deck, be sure the tape length is long
enough to perform both functions. If you want to sleep and wake up
listening to a tape, and the length of the tape is shorter than the
sleep timer setting, timer playback or recording will not be possible.
or
button to select
End time
Desired time
Timer playback or recording
start time