Sharp CD-G10000 Operation Manual - Page 21

Browse online or download pdf Operation Manual for Stereo System Sharp CD-G10000. Sharp CD-G10000 47 pages. Mini component system

Print Page

Press the ON/STAND-BY button to turn the power on.

Press the CD button.

Press the

1 button and within 5 seconds, press the

OPEN/CLOSE button to open the disc tray 1.

Place the disc on the disc tray 1, label side up.

Be sure to place 3" (8 cm) disc in the middle of the disc trays.

Press the OPEN/CLOSE button to close the disc tray 1.

[CD]

Total number of

Total playing

tracks on the disc

time of the disc

whose number

is flashing

Due to the structure of its disc information, it takes longer to

read an MP3 disc than a normal CD (approximately 20 to 90

seconds).

You can place discs on the trays 2 - 5 by following steps 3

- 5.

Press the

button to start playback.

To exchange other discs while playing a disc:

Press one of the

seconds, press the OPEN/CLOSE button and exchange discs.

5" (12 cm)

3" (8 cm)

To remove the discs:

In the stop mode, press the

press the OPEN/CLOSE button.

Caution:

[MP3]

MP3 disc indicator

Total number

of folders

of files

Disc play indicator

Playback will begin from track 1 on the disc 1. After that disc fin-

ishes playing, the next disc will automatically play.

After the last track on the fifth disc is played, the unit will stop

automatically.

When there is no disc in one of the disc trays (1 - 5), the empty

tray will be skipped to the next tray with a disc.

1 -

5 buttons for the stopped disc and within 5

1 -

5 button and within 5 seconds,

Do not place two discs in one disc tray.

Do not play discs of special shapes (heart, octagon, etc.) as it

may cause malfunctions.

Do not push the disc tray while it is moving.

If the power fails while the tray is open, wait until the power is

restored.

If the disc tray is stopped with force, "ER-CD20" will appear on

the display for 3 seconds and the unit will not function. If this

occurs, press the ON/STAND-BY button to enter the power

stand-by mode and then turn the power on again.

If TV or radio interference occurs during CD operation, move the

unit away from the TV or radio.

If a disc is damaged, dirty, or loaded upside down, the disc will

skip.

CD-G10000

CP-G10000S