Sharp CD-G100000 Operation Manual - Page 16

Browse online or download pdf Operation Manual for Stereo System Sharp CD-G100000. Sharp CD-G100000 47 pages. Mini component system

Print Page

Remote control

CD-G10000

CP-G10000S

Battery installation

Use 2 "AA" size batteries (UM/SUM-3, R6, HP-7 or similar).

Batteries are not included.

1 Open the battery cover.

2 Insert the batteries according to the direction indicated in

the battery compartment.

When inserting or removing the batteries, push them toward the

battery terminals.

3 Close the battery cover.

Precautions for battery use:

Replace all old batteries with new ones at the same time.

Do not mix old and new batteries.

Remove the batteries if the unit will not be used for long periods

of time. This will prevent potential damage due to battery leak-

age.

Caution:

Do not use rechargeable batteries (nickel-cadmium battery, etc.).

Installing the batteries incorrectly may cause the unit to malfunc-

tion.

Battery removal:

Open the battery cover, and pull up the battery to take out.

Notes concerning use:

Replace the batteries if the operating distance is reduced or if the

operation becomes erratic.

Periodically clean the transmitter on the remote control and the

sensor on the unit with a soft cloth.

Exposing the sensor on the unit to strong light may interfere with

operation. Change the lighting or the direction of the unit.

Keep the remote control away from moisture, heat, shock, and

vibrations.

Test of the remote control

Check the remote control after checking all the connections (see

pages 11 - 14).

Point the remote control directly at the remote sensor on the unit.

The remote control can be used within the range shown below:

Press the ON/STAND-BY button. Does the power turn on? Now,

you can enjoy music.

8" - 20'

(0.2 m - 6 m)

Remote sensor