Sharp CD-M10000W Operation Manual - Page 23

Browse online or download pdf Operation Manual for Stereo System Sharp CD-M10000W. Sharp CD-M10000W 34 pages. Mini component system / speaker system

Print Page

Playing karaoke

You can enjoy karaoke to CDs, radio, cassettes, and other external devices by con-

necting a separately available microphone to this unit.

Set the MIC LEVEL control to MIN to protect the speakers from

shock noise and to avoid disturbing noises.

Connect the microphone to the MIC socket.

! Use a microphone with a 6.3 mm (1/4") plug, an impedance of 600 ohms.

! Use a standard plug adaptor when using a microphone with a 3.5 mm (1/8")

diameter plug.

Press the ON/STAND-BY button to turn the power on.

Press one of the CD, TUNER (BAND), TAPE (1

buttons to select the audio source and play it.

If you wish to record, start recording in the TAPE 2 compartment. (Refer to pages

24 - 26 for details.)

Adjust the volume of the audio source using the VOLUME control.

Turn the MIC LEVEL control towards MAX to increase the micro-

phone volume and towards MIN to decrease it.

Press the ECHO LEVEL

button on the remote control to increase

the microphone echo, and the ECHO LEVEL

it.

Notes:

! When you sing too loud through the microphone, your voice may be distorted

depending on the devices connected. If this happens, lower the microphone vol-

ume.

! If an extremely sensitive microphone is used, howling may be generated.

! Unidirectional microphone is more appropriate for vocal use.

If squealing occurs:

! Reduce the microphone volume.

! Change the direction of the microphone.

! Reduce the volume of the main unit.

! Move the microphone away from the speakers.

Caution:

! When not using the microphone, remove it from the MIC socket.

! When connecting or disconnecting the microphone, set the MIC LEVEL control to

MIN.

01/10/1

CD-M10000W(X)E3.fm

CD-M10000W

ENGLISH

2), VIDEO/AUX

button to decrease

E-22