Sharp CD-SW200 Operation Manual - Page 37
Browse online or download pdf Operation Manual for Stereo System Sharp CD-SW200. Sharp CD-SW200 44 pages. Sharp cd-sw200 cd players: quick start
Also for Sharp CD-SW200: Quick Start Manual (2 pages)
Print Page
Sleep operation
The radio, CD, MP3/WMA disc and cassette tape can all be turned
off automatically.
1
Play back the desired sound source.
2
Press the CLOCK/TIMER button.
3
Within 10 seconds, press the
or
button to select
"SLEEP", and press the MEMO-
RY/SET button.
4
Press the
or
(Maximum: 3 hours - Minimum: 1 minute)
3 hours - 5 minutes
5-minute intervals
5 minutes - 1 minute
1-minute intervals
5
Press the MEMORY/SET
button.
"SLEEP" will appear.
6
The unit will enter the power stand-by mode automatically
after the preset time has elapsed.
The volume will be turned down 1 minute before the sleep op-
eration finishes.
To confirm the remaining sleep time:
1 While "SLEEP" is indicated, press the CLOCK/TIMER button.
2 Within 10 seconds, press the
"SLEEP X : XX".
"X : XX" is remaining sleep time.
The remaining sleep time is displayed for about 10 seconds.
You can change the remaining sleep time while it is displayed by
pressing the MEMORY/SET button.
button to select the time.
or
button to select
To cancel the sleep operation:
Press the ON/STAND-BY button while "SLEEP" is indicated.
To cancel the sleep operation without setting the unit to the stand-by
mode, proceed as follows.
1 While "SLEEP" is indicated, press the CLOCK/TIMER button.
2 Within 10 seconds, press the
"SLEEP OFF", and press the MEMORY/SET button.
To use timer and sleep operation together
Sleep and timer playback:
For example, you can fall asleep listening to the radio and wake up
to CD in the next morning.
Sleep and timer recording:
For example, you can fall asleep listening to the CD and record radio
programs while sleeping.
1 Set the sleep time (see left, steps 1 - 5).
2 While the sleep timer is set, set the timer playback or recording
(steps 2 - 10, pages 34 - 35).
Timer playback or
recording setting
Sleep timer setting
1 minute - 3 hours
Sleep operation will
automatically stop.
Caution:
When using the cassette deck, be sure the tape length is long
enough to perform both functions. If you want to sleep and wake up
listening to a tape, and the length of the tape is shorter than the sleep
timer setting, timer playback or recording will not be possible.
or
button to select
End time
Desired time
Timer playback or recording
start time
CD-SW200
37