Sharp CD-SW340H Operation Manual - Page 41
Browse online or download pdf Operation Manual for Stereo System Sharp CD-SW340H. Sharp CD-SW340H 48 pages. Mini component system
Also for Sharp CD-SW340H: Quick Start Manual (2 pages)
Print Page
Enhancing your system
The connection lead is not included. Purchase a commercially
available lead as shown below.
Portable audio
player, etc.
To the line output socket
Audio cable
(not supplied)
Listening to playback sounds of portable audio
player, etc.
1
Connect a portable audio player, etc. to the front AUDIO IN
socket.
2
Press the ON/STAND-BY button to turn the power on.
3
Press the AUDIO IN button.
4
Play the connected equipment.
If volume level of the connected device is too high, sound
distortion may occur. Should this happen, lower the volume of
the connected device. If volume level is too low, increase the
volume of the connected device.
Note:
To prevent noise interference, place the unit away from the television.
5
4
3
2
1
TIMER
CD
5
4
3
2
1
PLAYBACK (PLAY & STOP)
RECORD/PLAYBACK
PHONES
Auto power on function:
When you press any of the following buttons, the unit turns on.
AUDIO IN button (main unit and remote control): The unit turns on
and the "AUDIO IN" function is activated.
/
button on the main unit: The unit turns on and playback of
the last function starts (CD,TAPE,TUNER,AUDIO IN).
To record sounds of portable audio player, etc.
1
Insert a cassette in the TAPE 2 cassette compartment.
2
Press the AUDIO IN button.
3
Press the
button.
4
Press the
/
(TAPE
5
Play the portable audio player, etc.
Headphones
Before plugging in or unplugging the headphones, reduce the
volume.
Be sure your headphones have a 3.5 mm (1/8") diameter plug and
impedance between 16 and 50 ohms. The recommended
impedance is 32 ohms.
Plugging
in
the
headphones
automatically. Adjust the volume using the VOLUME control.
) button.
disconnects
the
speakers
5
4
3
2
1
TIMER
CD
5
4
3
2
1
PLAYBACK (PLAY & STOP)
RECORD/PLAYBACK
AUDIO
PHONES
IN
CD-SW340H
41