Sharp CD-XP120W Operation Manual - Page 18

Browse online or download pdf Operation Manual for Stereo System Sharp CD-XP120W. Sharp CD-XP120W 32 pages.

Print Page

Listening to a CD (CDs) (continued)

CD-XP120W

ENGLISH

! Programmed play

This may be operated only with the remote control.

You can choose up to 20 selections for playback in the order you

like.

1 Whilst in the stop mode, press

one of the

1 -

3 buttons to

select the desired disc.

2 Press the

button to select the desired

track.

If you select and memorise a track whose number exceeds the

last track number on the disc, it will not be played back.

3 Press the MEMORY/SET button to save the track number.

When the track is memorised, "MEMORY" will appear.

4 Repeat steps 1 - 3 for other tracks. Up to 20 tracks can be

programmed.

If you make a mistake, the programmed tracks can be cleared

by pressing the CLEAR button.

5 Press the

button to start playback.

E-17

Selected disc number

Selected track number

Playback order

To clear the programmed selections:

Whilst the "MEMORY" indicator is lit, set the

CD to the stop mode and then press the

CLEAR button.

Each time the button is pressed, one track will

be cleared, beginning with the last track pro-

grammed. When all the tracks are cleared,

"MEMORY" will disappear.

Adding tracks to the programme:

If a programme has been previously stored, the "MEMORY" indica-

tor will be displayed. Then follow steps 1 - 3 to add tracks. The new

tracks will be stored after the last track of the original programme.

Notes:

" If you open the disc tray, change to another function or enter the

stand-by mode, the programmed sequence is automatically can-

celled.

" During programme operation, random play is not possible.

! Care of compact discs

Compact discs are fairly resistant to damage, however mistracking

can occur due to an accumulation of dirt on the disc surface. Follow

the guidelines below for maximum enjoyment from your CD collec-

tion and player.

" Do not write on either side of the disc, particularly the non-label

side from which signals are read. Do not mark this surface.

" Keep your discs away from direct sunlight, heat, and excessive

moisture.

" Always hold the CDs by the edges. Fingerprints, dirt, or water on

the CDs can cause noise or mistracking. If a CD is dirty or does

not play properly, clean it with a soft, dry cloth, wiping straight out

from the centre, along the radius.

02/5/27

CD-XP120W(A)2.fm

YES

Correct