Digit Primo Instruction Manual - Page 3

Browse online or download pdf Instruction Manual for GPS Digit Primo. Digit Primo 4 pages.

5. Programming via SMS

The Digit Primo is shipped with 30s updates as standard. It will also send the SOS to a test SMS location, in order to send to your desired

recipient you will need to send an SMS. The default settings are for MTN and changes will need to be made if you wish to use a Vodacom

card.

5.1 SOS message numbers

A maximum of three recipient numbers can be added for sending SOS messages

You will need to send the following SMS to the device depending on if you want to teach it one, two or three numbers

(For one number)

(For two numbers)

(For three numbers)

Replace

+27831234567

5.2 Message centers

If you are using a Vodacom SIM card in the device send the following SMS

AT+GTSRI=AIR11,2,,1,196.38.40.52,8030,,0,+27829119,10,1,,,,,0003$

If you are using MTN prepaid send this SMS

AT+GTSRI=AIR11,2,,1,196.38.40.52,8030,,0,+27831000113,10,1,,,,,0003$

Finally if you want to revert to the default MTN contract number send

AT+GTSRI=AIR11,2,,1,196.38.40.52,8030,,0,+27831000002,10,1,,,,,0003$

5.3 Changing the reporting time

The default reporting time (30 seconds) programming SMS is

AT+GTFRI=AIR11,1,0,,,0000,2359,30,1,30,1,001F,300,300,,,,,,,0007$

The characters in RED indicated the 30s time interval

In order to alter the time between position sending later the values of XX with a number between 10 and 86400s

86400 s is 24hours

5.4 Pin Code locking the SIM card

By default the device will not try to unlock the SIM card using a PIN number. However to protect users from using the SIM card to make

calls, you may wish to lock the SIM card with a PIN. BEFORE inserting the PIN locked SIM card you will need to teach the device the PIN

and instruct it to enter the code before starting up. Use a SIM card with NO PIN in order to teach it the code.

For example to teach it the PIN code 6789 send this SMS

AT+GTPIN=AIR11,1,6789,1,,,,,000E$

After sending the SMS, power down and then restart the Primo with the PIN blocked SIM card

If you would like to cancel the PIN code entering send the following SMS

AT+GTPIN=AIR11,0,,0,,,,,000E$

NB Use a SIM card with no PIN before sending this SMS

5.5 APN Settings. If you would like to edit the default APN settings you will need to send the following SMS.

AT+GTBSI=AIR11,APNname,USERname,PASSWORD,,,,,0002$

To revert back to the South African settings send the following

AT+GTBSI=AIR11,internet,internet,internet,,,,,0002$

AT+GTGLM=AIR11,1,1,3,+27831234567,,,,,,,000D$

AT+GTGLM=AIR11,1,1,3,+27831234567,+27831234567,,,,,,000D$

AT+GTGLM=AIR11,1,1,3,+27831234567,+27831234567,+27831234567,,,,,000D$

with the actual cellphone numbers you would like to receive the SOS message