Sharp XL-UH25H Operation Manual - Page 33
Browse online or download pdf Operation Manual for Stereo System Sharp XL-UH25H. Sharp XL-UH25H 36 pages.
Print Page
Maintenance
Cleaning the cabinet
Periodically wipe the cabinet with a soft cloth and a diluted soap
solution, then with a dry cloth.
Caution:
Do not use chemicals for cleaning (petrol, paint thinner, etc.). It
may damage the cabinet finish.
Do not apply oil to the inside of the unit. It may cause
malfunctions.
Cleaning the CD pickup lens
Poor performance during CD playback (skipping or jumping) can be
caused by a dirty or contaminated CD laser pick up lens. If this
happens then the use of a commercially available CD lens cleaning
discs may restore normal operation. Contact your supplier or local
CD software dealer to obtain CD lens cleaning discs. Ensure all
included instructions/documentation are carefully followed.
Specifications
As part of our policy of continuous improvement, SHARP reserves
the right to make design and specification changes for product
improvement without prior notice. The performance specification
figures indicated are nominal values of production units. There may
be some deviations from these values in individual units.
General
Power source
AC 220 - 240 V ~ 50 Hz
Power consumption
Power on: 35 W
Power stand-by: 0.6 W(*)
Dimensions
Width: 200 mm (7-7/8")
Height: 130 mm (5-1/8")
Depth: 221 mm (8-3/4")
Weight
2.7 kg (5.95 lbs.)
(*) This power consumption value is obtained when the
demonstration mode is cancelled in the power stand-by mode.
Refer to page 10 to cancel the demonstration mode.
Amplifier
Output power
MPO: 26 W (13 W + 13 W) (10% T.H.D.)
RMS: 20 W (10 W + 10 W) (10% T.H.D.)
RMS: 14 W (7 W + 7 W) (0.9% T.H.D.)
Output terminals
Speakers: 8 ohms
Headphones: 16 - 50 ohms
(recommended: 32 ohms)
Input terminals
Audio In (audio signal):
250 mV
XL-UH25H
33