Sharp 1457 series Online Manual - Page 32

Browse online or download pdf Online Manual for All in One Printer Sharp 1457 series. Sharp 1457 series 37 pages.

Print Page
4

Nothing Prints

If nothing prints even when the unit is turned on, please wait a few moments. The unit needs a longer time to process
intricate data. If the unit still does not print, refer to the check list below.
CHECK1
Has a paper jam occurred?
When the misfeed (
blinks in the display, the unit will stop because of a
misfeed.
Remove the jammed paper as explained in
"MISFEED REMOVAL" in the Operation Manual.
CHECK2
Is the ON LINE indicator off?
The ON LINE indicator on the operation panel turns
off while the unit is used for copying. Scanning and
printing is not possible at this time. When copying is
finished, the ON LINE indicator will turn on after the
set auto clear time elapses, and the unit will be
ready for scanning and printing. You can also press
the clear (
) key twice or press the ON LINE key
to make the unit ready for scanning or printing.
CHECK3
Is your unit selected correctly in the current
application for the print job?
When choosing "Print" from the "File" menu located in
applications, be sure you have selected "SHARP AL-
XXXX" printer displayed in the "Print" dialog box.
) indicator blinks or (
Check here.
CHECK4
Has the printer driver been installed
)
properly?
Check if the printer driver has been installed, following
the steps listed below.
1
Click the "start" button, click "Control Panel",
click "Printers and Other Hardware", and then
click "Printers and Faxes".
On Windows 95/98/Me/NT 4.0/2000, click the "Start"
button, select "Settings" and then click "Printers".
2
Check if the "SHARP AL-XXXX" printer driver
icon is shown.
If you still cannot print after confirming the "SHARP
AL-XXXX" printer driver icon, the printer driver may
not have been installed correctly. In this case, delete
SHARP Personal MFP series software and then
reinstall it.
Reference:
Uninstalling SHARP Personal MFP Series
Software
CONTENTS
INDEX
30