Sharp AL-1644 Software Setup Manual - Page 11

Browse online or download pdf Software Setup Manual for All in One Printer Sharp AL-1644. Sharp AL-1644 20 pages. Digital multifunctional system
Also for Sharp AL-1644: Online Manual (32 pages)

Print Page

Select the printer port and click the

"Next" button.

Select "LPT1" for the printer port.

If "LPT1" does not appear, another printer or

Note

peripheral device is using LPT1. In this case

continue the installation, and after the

installation is finished, change the port setting

so that the machine can use LPT1. This

procedure is explained in "Another printer is

using the parallel port (when using a parallel

cable)" on page 16.

When the model selection window

appears, select model name of your

machine and click the "Next" button.

For the name of the model that you are using,

see "DIFFERENCES BETWEEN MODELS" in

the Operation Manual.

Click the "Yes" button.

When "The MFP driver installation is

complete." appears, click the "OK"

button.

The Sharpdesk installer will start.

INSTALLING THE SOFTWARE

Begin the installation of Sharpdesk (if

"Sharpdesk" was selected in Step 5).

Follow the on-screen instructions.

If the following screen appears, click the

Caution

"Skip" button or the "Continue" button as

appropriate to continue the Sharpdesk

installation.

If "Skip" is selected, the Sharpdesk

installation will continue without installing

Sharpdesk Imaging.

If "Continue" is selected, Sharpdesk Imaging

will be installed. If Imaging for Windows is

installed on your computer, Sharpdesk

Imaging will overwrite Imaging for Windows.

Click the "Finish" button when the message

informs you that setup is successful.

When the "Finish" screen appears,

click the "Close" button.

When "Now connect the MFP interface cable to

the PC." appears, click the "OK" button.

After the installation, a message prompting

Note

you to restart your computer may appear. In

this case, click the "Yes" button to restart your

computer.

Turn off the power of the machine and

your computer, and connect the

machine to your computer with the

parallel cable. (p. 10)

After connecting the machine to your computer,

turn on the power of the machine and then start

up your computer.

This completes the installation of the software.

• If you installed the MFP driver, configure the printer

driver settings as explained in "CONFIGURING THE

PRINTER DRIVER" (p. 11).