Sharp AL-2051 Start Manual - Page 4

Browse online or download pdf Start Manual for All in One Printer Sharp AL-2051. Sharp AL-2051 41 pages. Digital multifunctional system
Also for Sharp AL-2051: Start Manual (45 pages), Service Manual (6 pages)

Sharp AL-2051 Start Manual

4. LOADING PAPER

Raise the handle of the paper tray and
1
pull the paper tray out until it stops.
Squeeze the lever of paper guide (A) and slide
4
the guide to match with the width of the paper.
Move paper guide (B) to the appropriate slot
as marked on the tray.
(B)
5. CONNECTING THE POWER CORD / POWER ON
If you use the unit in a country other than the country where the unit was purchased, you will need to make sure that your local power supply is
compatible with your model. If you plug the unit into an incompatible power supply, irreparable damage to the unit will result.
Ensure that the power switch of the
1
unit is in the OFF position.
OFF
About the scan head
The scan head lamp remains on constantly when the unit is in the ready condition (when the start (
The unit adjusts the scan head lamp periodically to maintain copying quality. At this time, the scan head moves automatically. This is normal and does not
indicate unit trouble.

6. HOW TO USE THE OPERATION GUIDE

Detailed explanations of the functions that can be used on the machine are provided in the Operation Guide in PDF format.
Insert the supplied CD-ROM into your
1
computer's CD-ROM drive.
Operation Guide CD-ROM
A paper form operation manul can be obtained from your authorized SHARP dealder or upon request by contacting SHARP.
SHARP Manufacturing France - Customer Documentation Department
Route de Bollwiller
68 360 SOULTZ - FRANCE
or by fax (+33) 3.89.74.87.78
Please inform the model name, the serial number of the machine and the language needed. Do not forget to add your name and your address.
2
Rotate the pressure plate lock in the direction
2
of the arrow to remove it while pressing down
the pressure plate of the paper tray.
Fan the paper and insert it into the tray.
5
Make sure the edges go under the
corner hooks.
(A)
Insert the attached power cord into the power cord
2
socket at the rear of the unit.
Plug the other end of the power cord into the
nearest outlet.
• Only insert the power cord into a properly
grounded wall socket.
• Do not use extension cords or power strips.
Display the contents of the CD-ROM, and open
2
the Operation Guide file.
Manual
English
) indicator is illuminated).
Operation Guide file (PDF)
Store the pressure plate lock which has been
3
removed in step 2. To store the pressure plate
lock, rotate the lock to fix it on the relevant
location.
Gently push the paper tray back into the unit.
6
• Be sure that paper is free of rips, dust,
wrinkles, and curled or bent edges.
• Make sure all the paper in the stack is
the same size and type.
• When loading paper, ensure there is no
space between the paper and the
guide, and check if the guide is not set
too narrow causing the paper to bend.
Loading paper in these ways will result
in document skew or a paper jam.
Turn the power switch on the left side of the
3
unit to the "ON" position.
* To view the Operation Guide in PDF format,
®
®
®
Adobe
Reader
or Acrobat
Reader
Adobe Systems Incorporated is required.
®
®
Adobe
Reader
can be downloaded from the
following URL:
http://www.adobe.com/
ON
®
of