Sharp AL-2060 Online Manual - Page 29

Browse online or download pdf Online Manual for All in One Printer Sharp AL-2060. Sharp AL-2060 41 pages.

TROUBLESHOOTING

Troubleshooting

If you experience difficulty using the machine, check the following troubleshooting guide before calling for service.

Many problems can be easily resolved by the user. If you are unable to solve the problem using the troubleshooting guide, turn off

the power switch and unplug the machine, and contact your SHARP service center.

PRINTING AND SCANNING PROBLEMS

In addition to this section, troubleshooting information can also be found in the README files for each of the software programs. The

README file (readme.txt) is copied to your computer when the software is installed, and can be found in the "Program Files" -

"SHARP" - "AL20502060" folder on the drive where you installed the software.

Problem

The machine does not print.

CO NT E N TS

The machine is not correctly connected to your computer.

→ Check both ends of the USB cable and make sure you have a solid connection. Try

a known good cable.

If the machine is used as a network printer,

1. The IP address has changed automatically because "Get IP Address

Automatically" was selected.

2. The machine's IP address was changed to an incorrect IP address using "Set

the IP Address".

→ If you are assigning an IP address using "Set the IP Address", select "Assign IP

Address" and manually enter the correct IP address.

If the machine is used as a shared printer, the name of the computer to which the

machine is connected or the share settings have changed.

→ Reconfigure the port setting of the shared printer.

The machine is not selected in the application.

→ After choosing "Print" from the "File" menu, make sure that "SHARP AL-XXXX" is

selected as the printer in the "Print" window.

I N D E X

Cause and solution

(part 1)

Page

Operation

Manual

Operation

Manual