Sharp AR-BC320 Driver Installation - Page 24

Browse online or download pdf Driver Installation for All in One Printer Sharp AR-BC320. Sharp AR-BC320 28 pages. Digital full colour multifunctional system

Print Page

INSTALLING AND USING THE TWAIN DRIVER

Scanning with the TWAIN driver

The TWAIN driver (SHARP MFP TWAIN C) complies with the international TWAIN standard and can be used with

many TWAIN-compliant software applications.

The example of scanning with Imaging* in Windows 2000 is explained below. Follow the same steps to scan with

other applications in other operating systems.

* Imaging is an accessory in Windows.

[Place the original and switch the machine to PC

SCAN mode]

Place the original on the document glass

or in the reversing automatic document

feeder.

G For information on placing the original, see page 4-

6 of "Operation Manual (for general information

and copier operation)".

G Only one side of an original can be scanned using

the SHARP TWAIN driver.

G Some versions of Windows and some software

applications may not allow multiple originals to be

scanned.

NOTE

When placing the original, make sure that it is

straight.

Touch the [PC SCAN] key in the touch

panel.

The display will change to PC SCAN mode and the

TWAIN driver can now be used.

NOTE

When you switch to PC SCAN mode,

G Operation using the operation panel is disabled,

with the exception of pressing the [CA] key and [C]

key and touching the [EXIT] key in the touch panel.

G New print jobs will not be accepted.

[Select the device]

Start Imaging and select "Select Device"

from the "File" menu.

The "Select Device" window appears.

NOTE

The procedure for selecting the device varies by

application. See the manual or Help for the

application you are using.

Select the TWAIN driver of the machine in

the "Select Device" window and click the

"OK" button.

[Open the TWAIN driver]

Select "Acquire Image" from the "File"

menu.

The TWAIN driver settings window appears.

NOTE

If a window appears prompting you to set the IP

address, set the IP address and then click the "OK"

button to close the window. (See page 21.)

[Select scan settings]

Select scan settings for the TWAIN driver.

When finished, click the "Preview" button.

An image of the original will appear in the TWAIN

driver. If the image is not satisfactory, adjust the

settings and then check the preview screen again.

NOTE

For information on selecting scan settings and

specifying the scanning area, click the

view Help.

button to