Sharp AR-C260M Installation Manual - Page 10

Browse online or download pdf Installation Manual for All in One Printer Sharp AR-C260M. Sharp AR-C260M 15 pages. Color adjustment
Also for Sharp AR-C260M: Network Scanner Operations (42 pages), Key Operator's Manual (19 pages), Printer Operation Manual (50 pages), Software Installation Manual (25 pages), Color Management Manual (8 pages), User Manual (8 pages)

Print Page

INSTALLING THE PRINTER DRIVER AND UTILITIES (SOFTWARE INSTALLATION)

Installation method 2

Use this procedure to install the software in the following environments:

1. Printer connected by LAN cable

2. Windows version: Windows NT 4.0/2000/Windows XP

3. Using the Windows LPR printing function

NOTES

G To install the software using the installer, you must have administrator's rights.

G In order to print using LPR, LPR port must be added. Go to [Start] - [Settings] - [Control Panel] - [Add /Remove

Programs] - [Add/Remove Windows Components] and open [Windows Components Wizard]. In [Components]

select [Other Network File and Print Services], click [Detail], select [Print Services for Unix] and click [OK].

[Windows Component Wizard] will be displayed. After the component is added, click on [Finish]. LPR port is

added.

G When using Windows NT 4.0, "Microsoft TCP/IP printing" is required to use the machine as a network printer.

Install the software as follows.

The following steps use Windows 2000/XP as an example. Install the software in Windows NT 4.0 in the same

way.

Set the IP address of the machine

To set the IP address of the machine, see step 1 of "Installation method 1" on page 6.

Installing the software in Windows NT 4.0/2000/XP

To install the software, see step 3 of "Installation method 1" on page 6.

Change the printer port from "LPT1" to the network port of the machine

3-1 Click the [Start] button, select [Settings],

and then click [Printers].

3-2 Right-click the SHARP AR-C260 series

printer driver icon and then select

[Properties] from the shortcut menu.

3-3 Click the [Add Port] button in the [Ports]

tab, select "LPR Port", and then click the

[New Port] button.

3-4 Enter the IP address in "Name or address

of server providing lpd:" in the "Add LPR

compatible printer" screen, enter "lp" in

"Name of printer or print queue on that

server:", and then click the [OK] button.

Follow steps 5 to 7 on page 7 to automatically configure the peripheral devices

installed on the machine. (This can only be used when using the machine in a

3-5 Make sure that a checkmark appears by

the printer port for which you entered the

IP address (example: 10.36.128.226) in

Step 3-4, and then click the [Apply]

button.

The machine is now connected to your computer

on the network.