Sharp AR-M236 Key Operator's Manual - Page 17

Browse online or download pdf Key Operator's Manual for All in One Printer Sharp AR-M236. Sharp AR-M236 24 pages. Digital multifunctional system
Also for Sharp AR-M236: Software Setup Manual (18 pages), Software Setup Manual (20 pages), Brochure & Specs (9 pages)

Print Page

PROGRAMS FOR COPY MODE

This chapter explains the key operator programs that are used for copy mode.

COPY SETTINGS

KEY OPERATOR PROGRAMS

COPY FUNCTION SETTINGS

INITIAL STATUS SETTINGS

ROTATION COPY SETTING

EXPOSURE ADJUSTMENT

"COPY SETTINGS" consists of the following

programs:

● INITIAL STATUS SETTINGS

● ROTATION COPY SETTING

● EXPOSURE ADJUSTMENT

● AUTO PAPER SELECTION SETTING

● SETTING A MAXIMUM NUMBER OF COPIES

● SORT AUTO SELECT

● DISABLING DELETION OF JOB PROGRAMS

INITIAL STATUS SETTINGS

The copy settings revert to the default settings when

the power switch is turned on, when the [CLEAR ALL]

key (

) is pressed, or when the auto clear time

elapses. This program is used to change the default

settings, or return changed default settings to the initial

factory default settings.

Defaults for the following copy settings can be

changed:

• Paper tray

• Copy ratio

• Post-processing functions* (non-sort, sort, staple

sort, and group)

*Settings for the post-processing functions vary

depending on whether or not a FINISHER is

installed.

If this program is used to change the default

Note

setting for the duplex function to other than

"one-sided"

fails or is disabled, the setting will revert to

"one-sided"

* DISABLING OF DOCUMENT FEEDER (p.12)

DISABLING OF DUPLEX (p.12)

ROTATION COPY SETTING

When this program is enabled, the original image is

automatically rotated 90 degrees in the event that the

original and the paper are in different orientations.

(Rotation can only take place when auto paper

selection and automatic ratio selection are used.)

1/3

AE:3

• Exposure mode

• Duplex function

"one-sided" and the RSPF

"one-sided".

EXPOSURE ADJUSTMENT

This program is used to adjust the exposure level

when "Auto" is used for the copy exposure.

The auto exposure level can be set separately for the

document glass and RSPF.

[1] is the lightest level and [5] is the darkest level.

AUTO PAPER SELECTION SETTING

This program is used to select the paper type* that is

used when the automatic paper selection function

operates. "PLAIN PAPER" or "PLAIN AND RECYCLE

PAPER" can be selected. Auto paper selection can

also be disabled with this program.

* The paper type set for each tray in the tray settings of

the user settings. (See "CUSTOM SETTINGS" in the

operation manual for copier.)

SETTING A MAXIMUM NUMBER OF

COPIES

This program is used to set the maximum number of

copies that are allowed per original.

Any number from 1 to 999 can be set for the

maximum.

SORT AUTO SELECT

(When a RSPF is installed)

This program can be used to disable automatic

selection of the sort function.

DISABLING DELETION OF JOB

PROGRAMS

This program is used to prevent copy settings stored in

job programs from being changed or deleted.