Sharp AR-M277 IMAGERs Software Setup Manual - Page 15

Browse online or download pdf Software Setup Manual for All in One Printer Sharp AR-M277 IMAGERs. Sharp AR-M277 IMAGERs 20 pages. Digital multifunctional imager
Also for Sharp AR-M277 IMAGERs: Specifications (2 pages), Software Setup Manual (18 pages), Key Operator's Manual (24 pages), Quick Reference Manual (39 pages), Quick Reference Manual (39 pages)

Print Page
Sharp AR-M277 IMAGERs Software Setup Manual
!!install_ar230270.book 13 ページ ２００４年２月１９日　木曜日　午後１時１７分

CONFIGURING THE PRINTER DRIVER

After installing the printer driver, you must configure the printer driver settings appropriately for the
number of paper trays on the machine and the size of paper loaded in each tray.
1
Click the "start" button, click "Control
Panel", click "Printers and Other
Hardware", and then click "Printers and
Faxes".
In operating systems other than Windows XP, click
the "Start" button, select "Settings", and then click
"Printers".
2
Click the "SHARP AR-XXXX" printer
driver icon and select "Properties" from
the "File" menu.
If you are using Windows NT 4.0/2000/XP, go to
step 4.
3
In Windows 95/98/Me, click the "Setup"
tab.
4
Click the "Configuration" tab and set the
printer configuration based on the
options that have been installed.
Set the printer configuration properly.
Otherwise, printing may not take place
correctly.
5
Click the "Set Tray Status" button and
select the size of paper that is loaded in
each tray.
Select a tray in the "Paper source" menu,
and select the size of paper loaded in that
tray from the "Set Paper Size" menu. Repeat
for each tray.
6
Click the "OK" button in the "Set Tray
Status" window.
7
Click the "OK" button in the printer
properties window.
13