Sharp AR-M316 Setup Manual - Page 5

Browse online or download pdf Setup Manual for All in One Printer Sharp AR-M316. Sharp AR-M316 20 pages. Digital multifunctional system key operator's guide
Also for Sharp AR-M316: Operation Manual (4 pages), Online Manual (36 pages), Operation Manual (48 pages), Key Operator's Manual (24 pages)

Sharp AR-M316 Setup Manual

INSTALLING THE SOFTWARE

If an error message appears, follow the on-screen instructions to solve the problem. After the
Note
problem is solved, the installation procedure will continue. Depending on the problem, you may
have to click the "Cancel" button to exit the installer. In this case, reinstall the software from the
beginning after solving the problem.

STANDARD INSTALLATION (USB only)

The procedure for a standard installation of the software is explained below. If the machine is
connected by a USB cable, it is recommended that you use the standard installation.
The standard installation can only be used when the machine is connected by a USB cable. If the
Note
machine is connected by a parallel cable, use the custom installation procedure (page 5).
1
The USB cable must not be connected
to the machine. Make sure that the
cable is not connected before
proceeding.
If the cable is connected, a Plug and Play
window will appear. If this happens, click the
"Cancel" button to close the window and
disconnect the cable.
The cable will be connected in step 9.
Note
2
Insert the "Software CD-ROM" into your
computer's CD-ROM drive.
3
Click the "start" button, click "My
Computer" (
the [CD-ROM] icon (
In Windows 98/Me/2000, double-click "My
Computer" and then double-click the
[CD-ROM] icon.
4
Double-click the "Setup" icon (
5
The "SOFTWARE LICENSE" window will
appear. Make sure that you understand
the contents of the license agreement,
and then click the "Yes" button.
You can show the "SOFTWARE
Note
LICENSE" in a different language by
selecting the desired language from
the language menu. To install the
software in the selected language,
continue the installation with that
language selected.
), and then double-click
).
).
6
Read the message in the "Welcome"
window and then click the "Next" button.
7
Click the "Standard" button.
Follow the on-screen instructions.
If you are running Windows 2000/XP
Caution
and a warning message appears
regarding the Windows logo test or
digital signature, be sure to click
"Continue Anyway" or "Yes".
8
When the finish screen appears, click
the "Close" button.
A message will appear instructing you to
connect the machine to your computer.
Click the "OK" button.
After the installation, a message
Note
prompting you to restart your computer
may appear. In this case, click the
"Yes" button to restart your computer.
3