Sharp AR-M350 Imager Operation Manual - Page 15

Browse online or download pdf Operation Manual for All in One Printer Sharp AR-M350 Imager. Sharp AR-M350 Imager 40 pages. Ar-m280 | ar-m350 | ar-m450 operation manual (for network scanning)
Also for Sharp AR-M350 Imager: Brochure & Specs (11 pages), Parts Manual (30 pages), Operation Manual (32 pages), Refilling Manual (8 pages)

Print Page

Select the desired output mode (see below).

2-SIDED COPY

OUTPUT

NOTE

If you touch the [SORT] or [GROUP] key, its corresponding

icon will appear on the touch panel. To change the

selection, touch the icon to return the display to the output

setting screen.

Use the numeric keys to set the desired number

of copies.

Output mode (sort copy and group copy)

[Example] Five sets of copies from three originals

● ● ● ● ●

Sort copy

Originals

● ● ● ● ●

Group copy

Originals

When a document is

detected on the document

glass, the group mode will

be automatically selected.

To select sort copy, touch

the [OUTPUT] key, then

touch the [SORT] key on the

displayed screen, and then

touch the [OK] key.

Up to 999 can be set.

Use the [C] (clear) key to

cancel an entry if a mistake

has been made.

Five sets of copies

Five copies of each original

Press the [START] key.

Touch the [READ-END] key.

PLACE NEXT ORIGINAL. PRESS [START].

WHEN FINISHED, PRESS [READ-END].

READ-END

When originals are placed in the document feeder tray,

a sort icon will appear on the touch panel and the sort

copy mode will be automatically selected. In this case,

copies will be delivered as shown in the upper illustration

to the left. For output in the group mode as shown in the

lower left illustration, the group mode must be selected

on the output setting screen.

NORMAL COPYING

Replace the original with

the next original and press

the [START] key. Repeat this

operation until all originals

have been scanned.

If sort was selected in step

4, go to the next step.