Sharp AR-M450 Imager Operation Manual - Page 30

Browse online or download pdf Operation Manual for All in One Printer Sharp AR-M450 Imager. Sharp AR-M450 Imager 40 pages. Ar-m280 | ar-m350 | ar-m450 operation manual (for network scanning)
Also for Sharp AR-M450 Imager: Brochure & Specs (11 pages), Parts Manual (30 pages), Operation Manual (32 pages), Refilling Manual (8 pages)

Print Page
Sharp AR-M450 Imager Operation Manual

INTERRUPTING A PRINT OR COPY RUN

INTERRUPT can be used to temporarily stop a long print or copy job so that another copy job can be run. Only copy
jobs can be run during interrupt.
1
Place the original in the document feeder tray
or on the document glass. (page 7)
2
Touch the [INTERRUPT] key.
0
INTERRUPT
ORIGINAL
A4
AUTO
EXPOSURE
AUTO
A4
PAPER SELECT
100
%
0
CANCEL
ORIGINAL
A4
AUTO
EXPOSURE
TO
A4
PER SELECT
100
%
3
Make all other desired settings such as
exposure, paper size and number of copies and
then press the [START] key.
PLACE NEXT ORIGINAL. PRESS [START].
WHEN FINISHED, PRESS [READ-END].
READ-END
■ When step 3 is completed, a copy job icon will appear
at the top of the job icon queue at the left side of the
screen and interrupt copying will start. After the
interrupt job is completed, the interrupted job will
automatically resume.
28
When it is possible to interrupt
a print or copy job in progress,
the [INTERRUPT] key will
appear as shown in the
illustration.
When the [INTERRUPT]
key is touched in step 2, the
[INTERRUPT] touch key will
be
replaced
by
the
[CANCEL] key as shown in
the illustration. To cancel
interrupt copying at any
time, touch the [CANCEL]
key.
When using the document
glass, replace the original
with the next original and
press the [START] key.
Repeat this operation until
all originals have been
scanned. Then, touch the
[READ-END] key.