Sharp AR-M550N Key Operator's Manual - Page 6
Browse online or download pdf Key Operator's Manual for All in One Printer Sharp AR-M550N. Sharp AR-M550N 20 pages. Digital multifunctional system
Print PageUSING THE KEY OPERATOR PROGRAMS
The procedure for configuring the key operator programs is explained below using the "Key operator code change"
program as an example. Follow the same steps to configure the programs that are explained beginning on page 7.
Press the [CUSTOM SETTINGS] key.
1
2
Touch the [KEY OPERATOR PROGRAMS]
key.
FAX DATA
SENDER CONTROL
RECEIVE/FORWARD
KEY OPERATOR PROGRAMS
3
Use the numeric keys to enter the five-digit
key operator code.
KEY OPERATOR CODE
Touch
the
[KEY
4
CHANGE] key .
PRINTER
NGS
SETTINGS
KEY OPERATOR
CODE CHANGE
program on page 7.
4
Each time a number is
entered, the dashes (-)
in the display will change
to asterisks ( ). The
factory default setting for
the key operator code
number is 00000.
OPERATOR
CODE
If you wish to configure a
different program, select
the program in this step.
A setting screen for the
selected program will
appear.
See
the
explanation
of
the
Use the numeric keys to enter the new
5
5-digit key operator code.
-----
00000
programmed as an account number cannot be
used). The entered number will be the new key
operator code. Be sure to remember this number.
6
Touch the [OK] key. You will return to the
screen of step 4.
OK
Press the [CA] key to exit the program.
7
Use a number for the
key operator code that
has
not
been
programmed
as
an
account
number
for
auditing
mode
(a
number that has been
This
completes
the
procedure for changing
the key operator code. If
you wish to configure
another program, touch
the key of the desired
program in the screen of
step 4.
You will exit the key
operator programs and
return
to
the
main
screen.