Sharp AR-M620U Technical Manual - Page 16

Browse online or download pdf Technical Manual for All in One Printer Sharp AR-M620U. Sharp AR-M620U 48 pages. Digital multifunctional system
Also for Sharp AR-M620U: Key Operator's Manual (20 pages)

Print Page
Sharp AR-M620U Technical Manual
AR-M550 / AR-M620 / AR-M700 Coin Vend Interface
The coin vend interface for the AR-M550, AR-M620 and AR-M700 machines is located on the
Scanner Control PWB.
Before connecting a third party auditor, the device should conform to the following
specifications:-
1. The auditor interface should be optically isolated from the copier.
2. The external auditor interface should be 'Power Supply Unit' independent.
3. The external auditing device's Power Supply Unit should be a plug-top adapter, not
an internal supply.
4. The external auditing device's plug-top adapter should have a reinforced insulation
barrier.
5. The external auditing device must 'hold' a CE mark.
To enable coin vend function, test command 26-03 and select Vendor Control (set value 2), the
LCD display should now display the message 'Under Vendor Control' when the copier is re-
started. The message will clear and copying will be possible only when the external auditing
device completes the interface's enable loop.
Connector Signals and Functions
Pin #
1
2
3
4
5
6
7
8
9
10
11
12

COIN VEND INTERFACE

Signal Name
24vdc
Maximum current 100mA
P-GND
Ground, connected to pin 3 for 'enable loop'
/CV_COPY
Enables ready status of copier
/CV_COUNT
Paper exit copy signal (Late billing pulse)
/CV_START
Copy start paper feed clutch signal (Early billing
pulse)
/CA_CA
Clear all signal
/CA_STAPLE Staple signal
/CV_DPX
Duplex signal
/CV_SIZE0
Copy paper size indicator
/CV_SIZE1
Copy paper size indicator
/CV_SIZE2
Copy paper size indicator
/CV_SIZE3
Copy paper size indicator
Details
16
February 2005