Sharp AR-NB3 Printing Manual - Page 18

Browse online or download pdf Printing Manual for All in One Printer Sharp AR-NB3. Sharp AR-NB3 41 pages. Digital copier/printer/multifunctional system option
Also for Sharp AR-NB3: Network Scanner Operations (40 pages), Options Manual (44 pages)

Print Page

PRINTING FROM A MACINTOSH

This chapter explains the procedures for printing from a Macintosh environment.

BASIC PRINTING

To use the machine as a printer for the Macintosh, the PS3 expansion kit (AR-PK1/N) must be installed and the

machine must be connected to a network. To install the PPD file and configure the printer driver settings, see "2.

INSTALLING THE SOFTWARE (FOR OPTIONS)" in the "Software setup guide".

Before printing, make sure that the correct size of paper for your document has been loaded in the machine.

Paper that can be used and the procedures for loading paper are the same as for copying. See the "Operation

Note

manual (for general information and copier)".

Make sure that the ONLINE indicator

on the operation panel is lit.

If the ONLINE indicator is not on, press the [PRINT]

key to switch to printer mode and then use the [

to select "ONLINE".

COPY

ON LINE DATA

SCAN

The status of the printer function is indicated by the

ONLINE and DATA indicators above the [PRINT] key.

ONLINE indicator

The machine is

Lit

online.

Printing is possible.

A print job is being

Blinking

canceled.

The machine is

offline.

Off

Printing is not

possible.

Start the application and open the

document that you wish to print.

Select [Print] from the application's

[File] menu.

] key

Ready to print.

ONLINE

OFFLINE

DATA indicator

There is print data in

memory that has not

been printed yet.

Printing is in

progress or data is

being received.

There is no print

data in memory

and print data is

not being received.

Make sure that the correct printer is

selected.

• The machine name that appears in the

Note

"Printer" menu is the name that was

entered when AppleTalk settings were

configured from the "Network Utilities"

CD-ROM. Unless the name was changed

when configuring the settings, it will be

[SCxxxxxx] (where "xxxxxx" is a sequence

of characters that varies depending on

your machine).

• The Print window varies depending on the

operating system version, the printer

driver version, and the application.