Sharp BP-60C31 Quick Start Manual - Page 6
Browse online or download pdf Quick Start Manual for All in One Printer Sharp BP-60C31. Sharp BP-60C31 45 pages. Digital full colour multifunctional system
Print Page
BEFORE USING THE MACHINE
(1)
(2)
(11)
(12)
*1
(1)
Motion sensor
This sensor detects the presence of a person that approaches
the machine, and automatically wakes the machine from sleep
mode (Motion Sensor Mode Only).
(2)
[Power] button
Use this button to turn the machine's power on and off.
►
TURNING ON/OFF THE POWER (page 7)
(3)
Document feeding area cover
Open this cover to remove an original misfeed or clean the
paper feed roller.
(4)
Original guides
These guides help ensure that the original is scanned correctly.
Adjust the guides to the width of the original.
(5)
Document feeder tray
Originals must be placed face up.
(6)
Original exit tray
The original is discharged to this tray after scanning.
(7)
Telephone line jack (LINE)
When the fax function of the machine is used, the telephone line
is connected to this jack.
(8)
Extension phone jack (TEL)
When the fax function of the machine is used, an
extensionphone can be connected to this jack.
(9)
USB port (A type)
This is used to connect a USB device such as a USB memory
device to the machine.
*1 Can only be used on the BP-60C31/60C36/60C45/70C31/70C36/70C45/70C55/70C65.
*2 Peripheral device. For more information, see the User's Manual.
Equipped standard or not available in some countries and regions. Not available on some models. Contact your dealer or nearest authorised
service representative.
6
(4)
(5)
(6)
(3)
(9)
(13)
(14)
(15)(16)
*2
*2
(7)
(8)
(17)
(10)
LAN connector
Connect the LAN cable to this connector when the machine is
used on a network.
(11)
Main power switch
Use this button to turn the machine's power on and off.
►
TURNING ON/OFF THE POWER (page 7)
(12)
Toner collection container
This container collects excess toner that remains after printing.
(13)
Toner cartridge
This cartridge contains toner.
When the toner in a cartridge runs out, replace with new one.
(14)
Fusing unit
Heat is applied here to fuse the transferred image onto the
paper.
The fusing unit is hot. Take care not to burn yourself
when removing a misfeed.
(15)
Right side cover
Open this cover to remove a paper misfeed.
(16)
Paper reversing section cover
This unit is used for reversing paper when 2-sided printing is
performed. Open this cover to remove a paper misfeed.
(17)
Power plug
(9)
(10)
Facsimile
expansion kit