Sharp FO-2081 Start Manual
Browse online or download pdf Start Manual for All in One Printer Sharp FO-2081. Sharp FO-2081 2 pages.
Print Page
DIGITAL MULTIFUNCTIONAL SYSTEM
START GUIDE
This guide explains how to install the machine, and indicates important points to note for installation and usage. Read and understand this guide to ensure
that you install the machine correctly. The Operation Guide for the machine is on the accompanying CD-ROM. The procedure for viewing the guide is
explained in "How to use the operation guide". After installation, read the Operation Guide to make full use of all the machine has to offer.
POWER ON
If you use the unit in a country other than the country where the
unit was purchased, you will need to make sure that your local
power supply is compatible with your model. If you plug the unit
into an incompatible power supply, irreparable damage to the
unit will result.
Ensure that the power switch of
1
the unit is in the "OFF" position.
Turn the power switch on the left
2
side of the unit to the "ON"
position.
About the scan head
The scan head lamp remains on constantly when the unit is in the ready
condition (when the start (
) indicator is illuminated).
The unit adjusts the scan head lamp periodically to maintain copying quality.
At this time, the scan head moves automatically. This is normal and does not
indicate unit trouble.
CONNECTIONS
CONNECTING THE TELEPHONE LINE CORD
Plug one end of the telephone line cord into
the jack on the machine marked "LINE." Plug
the other side into a standard (RJ11C) single-
line telephone wall jack. Be sure not to plug
this telephone line cord into the "TEL" jack.
The "TEL" jack is used to attach an extension
telephone or answering machine to the
machine. (See "CONNECTING OTHER
DEVICES")
If your area experiences a high incidence of lightning or power
surges, we recommend that you install surge protectors for the
power and telephone lines. Surge protectors can be purchased
from your retailer or at most telephone specialty stores.
FINAL PREPARATIONS
CONNECTING OTHER DEVICES
If desired, an answering machine or external telephone can be
connected to the machine through the telephone jack, labeled
"TEL," on the rear of the machine.
• Connecting an answering machine to the machine allows you to
receive both voice and fax messages when you are out. To use
this feature, first change the outgoing message of your answering
machine, and then set the reception mode of the machine to
"A.M." (Answering Machine mode) when you go out.
MODEL: FO-2081
If you are using distinctive ringing with an answering machine,
you do not need to follow the procedure described below.
(Please note that when distinctive ringing is used, the
answering machine must be distinctive ring compatible.)
Comments:
1.It is advisable to keep the length of the message under 10 seconds. If it is
too long, you may have difficulty receiving faxes sent by automatic dialing.
2.Your callers can even leave a voice message and send a fax message on
the same call. Modify your outgoing message to explain that this can be
done by pressing their [START] key (
) after leaving their voice
message.
• You can connect an extension phone to the machine to make and receive
calls like any other extension phone on your line. Even if you pick up the
extension phone and hear a fax tone, the machine will automatically cut in
and take over the line. Note, however, if you also have a PC modem on the
same line, you must turn on the Remote Reception function, and
OFF
deactivate the Fax Signal Receive function. See "SETTING UP THE
MACHINE FOR USE WITH A PC MODEM" (p.37) and "USING THE
REMOTE RECEPTION FUNCTION" (p.38).
The Remote Reception function is initially set to "ON".
ON
ABOUT THE OPERATION GUIDES
The operation guides for the machine are as follows:
Start Guide (this manual)
This manual covers the procedures for setup and the safety relations.
Operation Guide for machine (on the FO-2081 Operation Guide
CD-ROM)
Explains the machine and how to use it as a copier. Also explains how to use
the machine as a printer and scanner for your computer.
Operation Guide for fax (on the FO-2081 Operation Guide CD-
ROM)
This manual explains the procedures for using the machine as a fax
machine.
This manual only explains the fax functions of the machine. For general
information on using the machine, including safety information, installation,
paper loading, removal of paper misfeeds, and peripheral equipment, see
the operation guide for the machine.
How to use the operation guide
Detailed explanations of the functions that can be used on the machine are
provided in the Operation Guide in PDF format.
Insert the supplied CD-ROM into
1
your computer's CD-ROM drive.
Operation Guide
CD-ROM
Display the contents of the CD-
2
ROM, and open the Operation
Guide file.
Manual
* To view the Operation Guide in PDF format, Adobe
®
®
Acrobat
Reader
of Adobe Systems Incorporated is required.
®
®
Adobe
Reader
can be downloaded from the following URL:
http://www.adobe.com/
PRINTED IN CHINA 2011D KS1 TINSE2164QSZZ
SPECIFICATIONS
Model
FO-2081
Type
Digital Multifunctional System, Desktop
Photoconductive type
OPC drum
Document glass type
Fixed
Copy/printing system
Dry, electrostatic transfer
Originals
Sheets, bound documents
Originals size
Max. 8-1/2" x 14" (A4)
Max. 8-1/2" x 14" (A4) Min. 5-1/2" x 8-1/2" (A5) Image loss:
Max. 11/64" (4 mm) (leading and trailing edges)
Copy size
Max. 3/16" (4.5 mm) (along other edges in total)
Max. 1/4" (6 mm) (trailing edge of the second copy of two-
sided copying.)
20 copies/min. (8-1/2" x 11" (A4) one-sided copying at 100%
1
Copying speed*
copy ratio)
Continuous copy
Max. 99 copies; subtractive counter
8.0 seconds (When user program 24 is set to OFF) 10.7
2
First-copy time*
seconds (When user program 24 is set to ON) (paper: A4,
exposure mode: AUTO, copy ratio: 100%)
3
Warm-up time*
Approx. 0 sec.
Document glass: Variable: 25% to 400% in 1% increments
(total 376 steps)
Fixed preset: Inch system: 25%, 50%, 64%, 78%, 100%,
129%, 200%, 400%
AB system: 25 %, 50 %, 70 %, 86 %, 100 %, 141 %, 200 %,
Copy ratio
400%
RSPF: Variable: 50% to 200% in 1% increments (total 151
steps)
Fixed preset: Inch system: 50%, 64%, 78%, 100%, 129%,
200%
AB system: 50 %, 70 %, 86 %, 100 %, 141 %, 200 %
Document glass: Moving optical source, slit exposure
Exposure system
(stationary platen) with automatic exposure function RSPF:
Moving original
One automatic feeding paper tray and one optional paper tray
Paper feed
(250 sheets each) + bypass tray (50 sheets)
Fusing system
Heat rollers
Developer system
Magnetic brush development
Light source
Tri-color CCD light source (CCD: 3 components; R, G, and B)
Scan: 600 x 300 dpi Output: 600 x 600 dpi (AUTO/TEXT mode)
Resolution
Scan: 600 x 600 dpi Output: 600 x 600 dpi (PHOTO mode)
Gradation
256 tones (8 bits)
Local voltage ±10% (For this copier's power supply
Power supply
requirement, see the name plate located on the back of the
unit.)
Power consumption
Max. 1.0 kW
Overall dimensions
31-5/8" (W) x 18-1/8" (D)
(with bypass tray folded)
(802 mm (W) x 460 mm (D))
4
Weight*
Approx. 42.1 lb. (19.1kg)
20-3/8" (W) x 18-1/8" (D) x 14-3/4" (H)
Dimensions
(518 mm (W) x 460 mm (D) x 376 mm (H))
Temperature: 50°F to 86°F (10°C to 30°C),
Operating conditions
Humidity: 20% to 85%
Sound power level L
Copying mode: 6.7 B
Standby mode: -
Sound pressure level L
Noise level
Copying mode: 51 dB
Standby mode: -
(*) = Less than background noise
Noise emission measurement in accordance with ISO7779.
*1 When making multiple duplex copies, the copy speed will vary based on
the environment conditions.
*2 First copy time may vary depending on the status of the machine.
*3 The warm-up time may vary depending on the ambient conditions.
*4 Not including TD and drum cartridges.
Printer Function
Print speed*
Max. 20 ppm (when printing on A4 size paper)
Resolution
600 dpi/300 dpi
Memory
128 MB
Operation
Emulation
PCL6
Guide file
Installed fonts
PCL6 compatible 80 outline fonts and 1 bitmap font.
(PDF)
10 Base-T /100 Base-TX Ethernet, USB 2.0 (Full-Speed/Hi-
US_English
Interface
Speed compatible interface)
[USB cable] USB cable that supports USB 2.0. Please
®
®
Reader
or
purchase a commercially available USB cable. [LAN cable]
Interface cables
Shielded type cable: Please purchase a commercially available
LAN cable.
Scanner Function
Type
Scanning method
Light source
Resolution
Original types
Effective scanning area
Scanning speed
Input Data
Output Data
Scanning colors
Protocol
Interface
Drop out color
Supported operating
systems
Void area
Interface cables
Scanner utilities
Facsimile Function
Applicable telephone line
Compression method
Transmission modes
Scanning method
Scanning resolution
(supports ITU-T standards)
Recording method
Transmission speed
Transmission time
Paper size
Effective recording width
Transmittable original size
wAd
(
*
)
Effective scanning width
(reference) (Bystander positions)
pAm
Halftone transmission
Contrast (exposure)
(
)
*
adjustment
Extension telephone
connection
Auto dialing
Timer transmission
Automatic document
feeding
Memory capacity
Error Correction Mode
(ECM)
250-sheet paper feed unit (MX-CS10)
Paper size
Paper weight
Paper capacity
Weight
Dimensions
Power supply
As a part of our policy of continuous improvement, SHARP reserves
the right to make design and specification changes for product
improvement without prior notice. The performance specification
figures indicated are nominal values of production units. There may
be some deviations from these values in individual units.
Flatbed scanner
Document glass/RSPF
Tri-color CCD light source
(CCD: 3 components; R, G, and B)
Basic: 600 dpi x 600 dpi
Setting range: 50 dpi - 9600 dpi
Sheet media, books
8-1/2" (Lengthwise) x 14" (Width)
(216 mm (Lengthwise) x 356 mm (Width))
2.88 msec/line
A/D 16 bit
R.G.B 1 or 8 bits/pixel
Black and white 2 value, Grayscale, Full color
TWAIN WIA (Windows XP/Vista/7 only) STI
10 Base-T /100 Base-TX Ethernet, USB 2.0 (Full-Speed/
Hi-Speed compatible interface)
Yes
Windows 2000 Professional/XP/Vista/7
None
[USB cable] USB cable that supports USB 2.0. Please
purchase a commercially available USB cable. [LAN
cable] Shielded type cable: Please purchase a
commercially available LAN cable.
Button Manager/Sharpdesk
Public switched telephone network
MH, MR, MMR, JBIG
Super G3, G3 (the machine can only send faxes to and
receive faxes from machines that support G3 or Super
G3)
CCD flatbed scanning
8 x 3.85 lines/mm (Standard)
8 x 7.7 lines/mm (Fine, Fine + Halftone)
8 x 15.4 lines/mm (Super Fine, Super Fine + Halftone)
Laser, electrostatic charge method
33.6 kbps
2.4 kbps Automatic fallback
Approx. 2 seconds
(Super G3 mode / 33.6 kbps, JBIG),
Approx. 6 seconds
(G3 ECM mode / 14.4 kbps, JBIG)
8-1/2" x 11"(Letter), 8-1/2" x 14"(Legal), or A4
8-1/2" max. (8-1/2" x 14" printing)
When using the RSPF
Maximum
One-sided original: 8-1/2" x 19.7"
Two-sided original: 8-1/2" x 14"
Minimum
8-1/2" x 5-1/2"
When using the document glass
Maximum 8-1/2" x 14"
8-1/2" maximum
256 levels
Light, Medium, Dark
Possible (1 telephone)
Combined total of 18 One-Touch Dial and Group keys;
100 Speed Dial numbers; redialing (automatic)
Yes
Yes (50 pages)
2 MB
Yes
5-1/2" x 8-1/2" to 8-1/2" x 14" (A5 to A4)
2
2
15 lbs. to 21 lbs. (56 g/m
to 80 g/m
)
One paper tray with capacity for 250 sheets of
80 g/m
2
bond paper
Approx. 6.6 lbs. (3 kg)
19-5/8" (W) x 17-1/2" (D) x 3-1/2" (H)
(498 mm (W) x 445 mm (D) x 88 mm (H))
Drawn from the machine