Sharp MX-2600N Safety Manual - Page 7

Browse online or download pdf Safety Manual for All in One Printer Sharp MX-2600N. Sharp MX-2600N 28 pages. Digital full colour multifunctional system
Also for Sharp MX-2600N: Brochure & Specs (8 pages), Brochure & Specs (13 pages)

Print Page

INSTALLATION REQUIREMENTS

Improper installation may damage this product. Please note the following during initial installation and whenever the

machine is moved.

1. The machine should be installed near an accessible

power outlet for easy connection.

2. Be sure to connect the power cord only to a power

outlet that meets the specified voltage and current

requirements. Also make certain the outlet is properly

grounded.

• For the power supply requirements, see the name

plate in the lower left corner of the left side of the

machine.

Connect the machine to a power outlet which is not

used for other electric appliances. If a lighting fixture is

connected to the same outlet, the light may flicker.

3. Do not install the machine in areas that are:

• damp, humid, or very dusty

• exposed to direct sunlight

• poorly ventilated

• subject to extreme temperature or humidity

changes, e.g., near an air conditioner or heater.

4. Be sure to allow the required space around the

machine for servicing and proper ventilation.

5. The machine includes a built-in hard drive. Do not

subject the machine to shock or vibration. In

particular, never move the machine while the power is

on.

A small amount of ozone is produced within the printer during operation. The emission level is insufficient to cause any health

hazard.

NOTE:

The present recommended long term exposure limit for ozone is 0.1 ppm (0.2 mg/m

concentration.

However, since the small amount that is emitted may have an objectionable odor, it is advisable to place the copier in a ventilated

area.

30cm

(11-13/16")

30cm

(11-13/16")

) calculated as an 8 hr. time-weighted average

45cm

(17-23/32")