Digitag Bluetooth Digital Scale Instructions Manual - Page 10

Browse online or download pdf Instructions Manual for Scales Digitag Bluetooth Digital Scale. Digitag Bluetooth Digital Scale 14 pages. Barkeepapp

Print Page

Troubleshooting

If you cannot see the
• Make sure that your scale is on.
On the front side of the scale, there is a plug icon with a power light display above it. A green
•
light indicates the scale is successfully plugged in.
•
icon, power icon and battery icon.
• A blue light above the
Device.
iOS
• A green light above the battery icon indicates the built-in battery is fully charged.
• Make sure your
you are conducting your Inventory, it may take a moment for your
digital scale to reconnect after you return.
• You can only use your
another
iOS Device
your
and using the
iPad
your scale.
• Verify that your
scanner with
Infinea Tab
make a complete the connection.
• Verify that the scanner you are usaing (
• Verify that the
See page 2
for System Requirements.
• Exit and restart BarkeepApp
• Turn off and restart your
Reminder: To use the
scanner with
Infinea Tab
icon
in the BarkeepApp:
Bluetooth
There is a light panel on the front side of the scale with a
icon indicates if the scale is wirelessly connected to any computer or
Bluetooth
Device and scale are near each other. For example, if you leave the area where
iOS
Digitag Bluetooth
is not connected to your scale. For example, if you are taking Inventory with
Digitag Bluetooth
Device is connected to a
iOS
Bluetooth
Device and digital scale you are using are compatible.
iOS
Device.
iOS
Digitag Bluetooth
support is required.
Bluetooth
digital scale with one
digital scale, your
scanner with
Linea-Pro
support. It is possible to slide the Device into a scanner but not
or
Linea-Pro
Infinea Tab
digital scale a
Linea-Pro
Device and
iOS
at a time. Check that
iOS Device
cannot also be connected to
iPhone
support or an
Bluetooth
) has a battery charge.
scanner with
Bluetooth
continue to next page
Bluetooth
Digitag Bluetooth
support or an
10