Sharp MX-M904 Manual - Page 11

Browse online or download pdf Manual for All in One Printer Sharp MX-M904. Sharp MX-M904 16 pages. Digital multifunctional system
Also for Sharp MX-M904: Brochure & Specs (2 pages), Brochure & Specs (12 pages), Brochure & Specs (13 pages), Installation Manual (19 pages)

Print Page

and lower than 55 Hz.

Criteria

(j)Products which are freestanding, non-portable, and

intended to be used in one location and which have

operable controls shall comply with the following:

(1) The position of any operable control shall be

determined with respect to a vertical plane, which is

48 inches in length, centered on the operable control,

and at the maximum protrusion of the product within

the 48 inch length (see Figure 1 of this part).

(j)(2) Products which are freestanding, non-portable,

and intended to be used in one location and which

have operable controls shall comply with the

following: Where any operable control is 10 inches or

less behind the reference plane, the height shall be

54 inches maximum and 15 inches minimum above

the floor.

(j)(3) Products which are freestanding, non-portable,

and intended to be used in one location and which

have operable controls shall comply with the

following: Where any operable control is more than 10

inches and not more than 24 inches behind the

reference plane, the height shall be 46 inches

maximum and 15 inches minimum above the floor.

(j)(4) Products which are freestanding, non-portable,

and intended to be used in one location and which

have operable controls shall comply with the

following: Operable controls shall not be more than 24

inches behind the reference plane.

Return to the top of the page.

Applicable.

Supporting Features

Supports

Remarks and explanations

Applicable

Applicable.

Page 11 of 16