Digital Acoustics IP7-FD Getting Started Manual - Page 3

Browse online or download pdf Getting Started Manual for Intercom System Digital Acoustics IP7-FD. Digital Acoustics IP7-FD 4 pages.

Print Page

TalkMaster

TalkMaster™ Server Software is a suite of Windows® based application

used to configure and manage Digital Acoustics IP7™ and ii3™ Intercoms

and Paging endpoints. Applications included with the TalkMaster Server are

the Admin Console for configuration of the Server and IP Endpoints and the

Operator Console for managing 2-way Intercom calls and 1-way Paging

announcements.

Please refer to the TalkMaster Admin Console Reference Manual on the

Software Installation CD for additional information software setup options

• Install the TalkMaster Software using the Software Installation CD

• Refer to the previous section to power up and connect the IP7 series

device to the network.

• Record the unique ID# from the bottom label of the IP Endpoint and note

the location where it will be installed

• Start the Admin Console and logon with an

Operator ID of admin and the default password

of admin

• Click the Settings → Endpoint

Defaults tab and make any

changes required for your

installation. For instance, if you

want to assign static IP Addresses,

uncheck the Assign Automatically

with DHCP checkbox

™

Software

• Click the IP Endpoints tab and press the FIND ALL button in the lower

right hand corner of the screen. Newly discovered IP Endpoints appear in

the list

• Click on the IP Endpoint to be configured (the "Icom ID" column must

match to the Intercom's previously recorded ID#)

• Click the Defaults button and enter a descriptive

name into the Location Name field

• Make any other desired changes, then select the

Options 1 tab

• Check the Use UDP/RTP option

• Check the Supports Full Duplex option

• Select the Options 2 tab

• Click the SET button to select the

Audio Profile specified for the Call

Station that is connected to the IP7-

Optional configuration settings include:

Options 1 tab

The IP7 has an on board Relay and Sensor.

Page 3 of 4