Crestron CLW-SLVD1 User Manual - Page 9

Browse online or download pdf User Manual for Switch Crestron CLW-SLVD1. Crestron CLW-SLVD1 13 pages. Crestron clw-dim1 wall box dimmer: user guide

Print Page

To continue a circuit past a switched light fixture to one or more duplex receptacles, connect the dimmer as shown in the

following diagram.

Figure 3: Adding a Duplex Receptacle Past a Switched Light Fixture

Master-Slave Installations

Figure 4: Wiring a -DIMS1 with a -SLVD1

If a neutral is not present in the wallbox, the wiring methods shown in the following diagrams can be used when wiring a

-DIMSX with -SLVD1 devices.

Figure 5: Alternative Wiring of -DIMS1 with -SLVD1s Where Neutral is Not Present (End-Fed three-way system)

In this configuration:

•

The white wire from the -DIMS1 to the load is coded HOT.

Installation Guide – DOC. 6250A

CLW-DIM1, DIMS1, & SLVD1(W/A/B)

Stand Alone Wall Box Dimmer: CLW-DIM1, DIMS1, & SLVD1 • 9